At 4°C pure water has a density of 1000 kg/1 m3. 1 litre = 1000 cm3 3 litre = 3000 cm3 = 0.003 m3 Mass = Density x Volume = 1000 kg/1 m3 x 0.003 m3 = 3 kg
Pure water has a density of 1,000 kg/m3
kg is a mass, ml is a volume. However with water, 1 kg = 1 liter = 1000ml
90 litres of water equals approximately 23 3/4 gallons, and a gallon of water weighs 8 pounds. So mulitply 23 3/4 gallons by 8, and the answer is 190.25 pounds, or 86.30 kg.
The most common unit for density is kg per meter3. Formula for density is D = mass over volume where, m = mass and v = volume. Density of water is 1.00 kg/m3
The mass of 0.23 kg of pure water is equal to 230 grams. Given that the density of pure water is 1 g/ml, the volume of 230 grams of water would be 230 ml.
The density of pure water at +4 degrees C, is 1 g/ml. The volume, then, of 5000 kg of water is 5000 liters.
1.0 litre = 1.0 kg of pure water at 4 degrees C and at 760 mm atmospheric pressure.Answer: 1.0 litre
Fresh, clean, clear, pure, standard water, at standard pressure and temperature, would be 1,000 liters, or 1 cubic meter.
At 4°C pure water has a density of 1000 kg/1 m3. 1 litre = 1000 cm3 3 litre = 3000 cm3 = 0.003 m3 Mass = Density x Volume = 1000 kg/1 m3 x 0.003 m3 = 3 kg
To find the mass of the can, you first need to convert the volume of water from liters to kilograms. Given that the density of water is approximately 1 kg/L, the mass of 5.5 liters of water is 5.5 kg. Subtracting this from the gross mass of 6.350 kg gives the mass of the can, which is 0.85 kg or 850 grams.
That depends on the body of water. Average for ocean water is approx: 1,020 to 1,029 kg•m−3 Which is only slightly more than the 1000 Kg•m−3 for pure water
Under.Another answer:According to Wikipedia, "Because the density of pure ice is about 920 kg/m³, and that of sea water about 1025 kg/m³, typically only one-tenth of the volume of an iceberg is above water."
A litre is a measure of volume and kg is a measure of mass (weight). Depending on density to answer this. A millilitre of water is a gram. So if you were working with pure water at sealevel they would be equal. but other than that it could not be answered.
500cc
The volume of water can be calculated using its density, which is approximately 1000 kg/m³. By dividing the mass of water (0.054 kg) by its density, we can find the volume. Therefore, the volume of 0.054 kg of water is approximately 0.000054 m³ or 54 cm³.
Pure water has a density of 1,000 kg/m3