0
the price of firewood depends on how much is available in your area, and on how many people want to buy it.
In north Idaho where I live, there are plenty of dead trees free to cut down and haul back home. If you hire someone, then a top-notch fuel wood like buckskin tamarack (Western Larch) goes for about $180, split and delivered.
A good, but not as hot burning a wood, like red fir, goes for $120 to $140, split and delivered. Some white pine is burned, but there is so little 'heat' in it, that it is mostly used to start up a new fire in the fireplace or cooking oven/range. It goes for $100 to $120 per cord. (8' x 8' x 4' = 1 cord)
Add your answer:
Earn +20 pts
How many bundles of wood in a face cord?
A cord of wood measures 8 x 4 x 4 (128 cubic ft.) A face cord varies tremendously in volume, but assuming it is 8 ft. long, 4 ft. high and about 12 in. wide: a face cord of wood is roughly 43 cubic feet. Bundles of wood vary as well, ranging from .9 cubic ft. to 1.5 cubic ft. You do the math.
How much does a cord of fire wood weigh?
A cord is defined as 128 cubic feet (3.62 m3), corresponding to a woodpile 4 feet (122 cm) wide, 4 feet (1.2 m) high and 8 feet (244 cm) long. So the weight would depend on the type of wood. Cherry or apple would weigh several times what balsa would. Also, the pieces of wood are irregular in shape so you would not be able to weigh a "cord" of wood with precision. That is why "cord" is a term of measure not weight, just like inch, foot, yard, mile, square ft., etc. ----- A cord of wood, dried and stacked well, will vary in weight from about 2000 to 4000 pounds. Clearly, softwoods, such as pine, will weigh on the lighter side and hardwoods on the heavier. If the wood is not dried, it is likely to weigh from 3000 to 5500 pounds, but different woods contain different amounts of water, so it is a little harder to predict without knowing the specifics. There is a good web page with information about this, run by the University of Nebraska, at the link below. It provides a good deal of information, including weight of a cord, by species, dried and not.
What is the shekere made out of?
The shekere is made of dried vine gourd, cord netting, seed beads and wood suchas devil woods
How often should you sweep a chimney?
a chimney sweep should be preformed after the burning of 1 to 1 1/2 face cord of well dried hard wood more often if you use a wood which is not properly dried or a soft wood I have an Older wood stove, I burn soft wood, I use Rutland creosote remover, and I sweep mine at least once a month
What is cherry wood?
Like Oak Wood from Oak Trees . . . Cherry wood comes from Cherry trees
How much is a cord of wood?
A cord of wood is worth around $180. The price may be different depending on the type of wood, as well as the season.
Cord of wood?
whats a cord of wood
What is the difference in a bush cord of wood and a cord of wood?
a cord of wood is 4ftx8ft by 16 inches deep a bush cord is 4ftx8ftx4ft
How much for a core of fire wood cost?
The price of a CORD of firewood will vary in different areas, and vary with the type of wood. Here in central Virginia it is $150-$200 per cord of seasoned oak or hickory firewood. A cord of wood is a stack 4 ft x 4ft x 8 ft.
What is the volume of a cord of wood?
a cord of wood is equal to 128 cubic feet of neatly stacked wood.
How much wood in a cord?
A cord of wood is generally 8 feet long, 4 feet tall, and 4 feet wide. The wood is cut into 16 inch lengths. The amount of wood in the cord varies depending on the type of wood but the wood must occupy a space of 128 square feet.
How much does a cord of hickory wood weigh?
A cord of hickory wood typically weighs between 4,500 to 5,000 pounds, depending on the moisture content of the wood.
What is tsuzuki made of?
wood and cord
What is a collection of wood called?
A cord
Cord of firewood?
A "cord" is a unit of measure for firewood. It is a stack of wood that is 4'x4'x8'. That is 128 cubic feet of wood.
How much does a cord of eucalyptus wood weigh?
A cord of eucalyptus wood typically weighs around 4,000 to 5,000 pounds, depending on factors such as moisture content and wood density.
How many cords in 65 sq.ft?
a cord is 128 cu ft of wood...assuming your wood is all 1 ft long then you have 65 cu ft and you have just over 1/2 a cord of wood. if your wood is 18 inch long,,,,then you have roughly 3/4 of a cord
