An incandescent light uses electric current passing through a wire with a high resistance to current flow. That makes the wire very hot and it glows, producing the light. A fluorescent light uses electricity to charge a gas in a tube. The charged gas glows, producing the light. For the same amount of light, more electricity is needed in an incandescent light than in a fluorescent light, but developing and building fluorescent lights required more advanced technology than did incandescent lights.
Fluorescent lights help the environment by conserving energy and being more efficient.Traditional bulbs produce about 15 lumens per watt, while fluorescent bulbs produce between 50 to 100 lumens per watt. This makes fluorescents bulbs five or six times more efficient than traditional bulbs.Also, the concepts behind the two bulbs are different. Traditional, or incandescent bulbs create heat in order to create light, which wastes a lot of energy. Fluorescent bulbs use a gas containing argon and mercury vapor that creates ultraviolet photons.This helps the environment by not wasting resources.Alternative AnswerFluorescent lamps might lower your electricity bill, but they use more energy and resources to manufacture, compared with incandescent lamps. They also contain mercury and other toxins. So fluorescent lamps probably do more damage to the environment than incandescent lamps. So, if you want to save on your energy bills, use fluorescent lamps; if you want to protect the environment, then use incandescent lamps.
Fluorescent light bulbs have been shown to use one quarter less energy than a typical incandescent light bulb and they last longer. You will save money on utility bills (despite the initial cost) and will help save the environment by using bulbs which last longer.
Incandescent lightbulbs have an electrical circuit that passes through a tungsten wire. As the electricity flows, the tungsten is heated up to a point where it emits light waves. Gases (xenon, I think) help sustain the wire until it breaks. This is when the light stops and needs to be replaced. (the tungsten also emits heat when lit) Incandescent lights have the full spectrum of colors. Fluorescent bulbs are filled with a gas and a bit of mercury. Electricity gives the ions in the gas energy, which is released in the form of light. This method sustains the bulb far longer than an incandescent lightbulb. Fluorescents release much less heat, making them more energy efficient. However, the spectrum of the fluorescent bulb is missing a few colors of the spectrum, which makes the spectrum look cool and incredibly weird.A fluorescent lamp or fluorescent tube is a gas-discharge lamp that uses electricity to excite mercury vapor. The excited mercury atoms produce short-wave ultraviolet light that then causes a phosphor coating on the inside of the bulb to fluoresce (glow), producing visible light.
Compact fluorescent light bulbs are cooler, use less electricity, and last a great deal longer than incandescents. However, they are more expensive than incandescent light bulbs and do contain trace amounts of mercury. They also have a slight delay before turning on.
An aquarium is sensitive to temperature changes. Incandescent lighting gives off much more heat than fluorescent lighting.
Fluorescent lights are better than incandescent lights for growing plants because they emit more of the necessary light spectrum for photosynthesis. Incandescent lights produce more heat and less usable light for plants, making them less efficient for plant growth.
Yes, the compact fluorescent light produce more light as compared to the same wattage of incandescent light, it is scientifically proved.
No, much hotter.
Fluorescent tubes last longer and supply more light per watt of energy consumed than an incandescent bulb.
Fluorescent lighting is cooler and far more energy-efficient than incandescent lighting.
Fluorescent light bulbs are typically more energy-efficient and produce more light for the same amount of power compared to incandescent bulbs. So, a fluorescent light bulb may appear brighter than an incandescent bulb with the same power rating.
Yes, fluorescent lights are more energy-efficient than incandescent lights. Fluorescent lights use 25-35% of the energy that incandescent lights use to produce the same amount of light, making them more cost-effective and environmentally friendly.
No, incandescent bulbs produce more heat than fluorescent bulbs. Incandescent bulbs generate light by heating a filament, which also emits heat. Fluorescent bulbs produce less heat because they use electricity to excite gas inside the bulb, which then emits light.
The moon is neither fluorescent nor incandescent. It merely reflects sunlight.
Fluorescent lights are more energy efficient than incandescent lights, saving on electricity costs over time. They also have a longer lifespan, reducing the frequency of bulb replacements. In large spaces like stores, offices, and schools, the cost and maintenance benefits of fluorescent lights make them a practical choice.
Better for what? Once upon a time it was true that florescents were more efficient than incandescents, and that incandescants had a more "natural look than florescants ... BUT these days - you pay your money and you take your pick.