0
A typical thermostat can typically handle a current of around 1-2 amps. This is sufficient for controlling the heating and cooling systems in a standard residential or commercial building. It is important to check the specifications of the specific thermostat model to ensure that it can handle the required amperage for the HVAC system it is controlling.
Add your answer:
Earn +20 pts
How much radiation is the average US Citizen exposed to during a typical year from TV and microwave ovens?
300 rem
How much does a weather sealer cost?
A total $50-$350 to weatherize a typical home, depending on overall size of the house and number of gaps to be sealed.
How much do you pay an hour for being a forensic scientist?
That depends on the agency you are applying for but a typical scientist would make 40-60K a year. Which translates to $20-$30/hr.
Should you turn your thermostat on and off to save money and energy?
You can, but a better idea is to get a programmable thermostat. The main problem with turning off the thermostat is that you'll turn on your thermostat first thing in the morning, and by the time the house gets to a comfy temperature, you're already leaving for work - so you don't get to enjoy the benefits of all the energy spent. That's silly. Program the thermostat turn up the heat before you get out of bed, and to turn it off before you leave for work. Likewise, program it to have the house warm when you get home. That's the whole reason you have a heater. With the programmable thermostat, your house is warm when you're there and cold when you're not, and you don't wait for the heater to catch up. Enjoy. With that said, it's a common misconception that the energy consumed in re-heating or re-cooling a building is greater than is consumed when maintaining a desired level. This misconception has been dispelled by years of research and numerous studies. Your heater's efficiency is roughly constant, so the total energy used depends on how much heat the house is giving off - and a cold house gives off less heat than a warm one. The long time your heater runs to reheat the house may feel wasteful but it is cancelled by the long time the heater is off as the house cools down - tests have shown that very little is gained or lost in the process. So, the longer your house remains at the lower temperature, the more energy you save. The difference is minuscule if you only shut it off for a couple hours, but it's a big deal if you step out for the weekend. Bottom line, turn off the thermostat when you'll be out all day and then some, but for regular day to day stuff you'll be happier (and just as frugal) programming your heater to handle the warming and cooling for you.
How much water is used in a typical load of laundry?
The use of water depends on which of the two types of machines you have, between a top-loading and a front-loading. A top-loading washer uses around 40 gallons of water from start to finish, whereas a front-loading machine uses about half as much..
How many volts will 4 gauge wire handle?
the gauge of the wire determines how much amperage a wire can carry the insulation determines how much voltage the wire can handle
How much amperage for a 20 hotpoint stove?
How much amperage for a hotpoint 20 inch stove
How much amperage a hair dryer draw?
A typical hair dryer draws around 10-15 amps when operating at its highest setting. It is important to check the specific amperage rating of the hair dryer you are using to ensure it is compatible with the electrical circuit you are using.
What 2 Factors Determine How Much Amperage Will Flow?
The two main factors that determine how much amperage will flow in a circuit are the voltage of the source supplying the electricity and the resistance in the circuit. According to Ohm's Law, the amperage (current) in a circuit is equal to the voltage divided by the resistance (I = V/R).
What are typical financial advisor fees?
Financial Advisor fees usually occur per transaction or a flat fee to handle so much business. Typical fees are 10 percent of each transaction or flat fees of a couple thousand dollars.
Why limit the amount of electricity passing trough a circuit?
Circuits are limited for a few reasons firstly because certain size wiring can only handle so much voltage and amperage before it could fail secondly wiring heats up when more amperage is drawn through it which can create fires or burning out of the circuit most appliances draw set amount of current and amperage if you have a low amperage appliance Eg pool pump drawing 4 amps and the windings start to fail the motor can start drawing excessive amperage creating a hazard, if you had a large circuit it may never trip the breaker indicating a fault with the appliance which can cause catastrophic failure.
How many amps will 10 wire hold?
A 10-gauge wire can typically handle around 30-35 amps of current. It is important to consult the National Electric Code and wire manufacturer specifications to determine the maximum current carrying capacity of a specific wire in a given installation.
How much amperage is needed to trip a 20amp GFCI outlet?
A 20 amp GFCI outlet will trip when the current exceeds 20 amps by a certain amount, typically around 5 mA to 6 mA, which is the typical trip threshold for GFCI outlets.
How much does a refrigerator thermostat cost to replace?
I paid $89 for a thermostat and $98 for labor
How much amperage is drawn by a kiloWatt motor?
To answer this question the motor voltage is needed.
How much does it cost to replace the thermostat housing?
How much does it cost to fix the thermostat housing for a ford explorer sport 4.0 6 cylinder
How much electricity used by a seed dryer?
A voltage and amperage need to be stated to answer this question.
