0
If your mold problem is an area of less than 10 foot square you can easly remove your self if more than this you should consult a mold remediation service. A website with more info is Floodx.com goto there knowledge section and link to EPA step by step removal guide.
Add your answer:
Earn +20 pts
can you please tell me if you can wipe mold off the walls and the walls then look clean?
Well you can wipe the mold off but it will still have a dirty look to it. Also the mold is inside the wall too and it will just regrow over the wall again.
How to remove mold from walls?
If your drywall is in good shape and not soft, you can remove mold from your walls by simply mixing some bleach in a bucket with water and use a sponge to scrub it off. It might not be a fun solution, but it works very well. If the mold is over a large area and you know there was water damage, you should bring in a professional to remediate the mold and replace the wall. Mold is a health hazard.
How do you clean mold off walls?
Bleach and water. Be sure sure to wear gloves. Make sure if you're renting you're taking pictures.
What is the difference between air duct cleaning and mold removal?
Air duct cleaning generally refers to the cleaning of cooling and heating system components, including the air ducts themselves, as well as heating and cooling coils, drain pans, fans and more. Mold may or may not be present in any of these components. Mold needs moisture to grow. If moisture is present, like if your air conditioning unit is leaking, microbiological growth may occur and mold spores from such growth may be released into your home. Often, air duct service providers will attempt to correct this situation by applying chemical biocides to kill microbial growth (e.g. mold). However, it is important to note that most air duct service providers are not certified in removing mold; rather, they will remove visible dust and debris in cooling and heating systems. Mold removal, on the other hand, involves the actual inspection, removal and remediation of a mold infested area. It is recommended to contact a mold remediation specialist who is certified with the Institute of Inspection, Cleaning and Restoration. These specialists are trained to completely remove, remediate and restore your property. In addition, more and more remediation companies like www.drymeout.com are using natural mold disinfectants rather than chemicals. In general, it is important to note that if there is mold growth, whether in your ducts or anywhere on your property, the condition that is causing mold growth must be corrected or mold growth will reoccur. In sum, if you suspect mold growth in your air ducts, it would be wise to contact a certified mold remediation specialist who can completely remove the mold in your home and remediate it.
How do you remove soap scum from shower walls and glass walls?
I have heard that WD-40 lubricant will work. (makes since...it's made from fish oil) I've never tried it myself though.
Why do you get dark spots on the ceiling where the wall meets the ceiling?
Its mold its when your your walls get moist make sure they don't get bigger it means you have a leak in your roof!
How to remove Black mold on ceiling ?
50/50 bleach and water in spray bottle Paint it with road paint and mould will not return.
How do you remove mold on limestone basement walls?
To remove mold on limestone basement walls, first wear protective gear such as gloves and a mask. Mix a solution of water and dish soap, then scrub the affected areas using a soft-bristled brush. Rinse thoroughly with clean water and allow the walls to air dry. Consider using a mold-resistant paint after cleaning to prevent future mold growth.
How do you get mold out of a carpet?
Ideally, you should remove the section of carpet with mold. After that, either inspect or have a professional inspect the subfloor. It will probably also have mold. People hate to admit it, but mold is a very serious problem. If necessary, remove a portion of the sub floor and inspect there. If the mold did not penetrate the sub floor, remove all the carpet and inspect the sub floor. Remove all moldy spots and install new sub floor and carpeting. Finally, you should try to locate the source of water for the mold. It's probably in the ceiling, so hope you are on the highest story of your building - or you'll have a lot of drywalling to do. If you're not on the highest level, you'll need to get into the ceiling. This might be a job for a professional.
Can condensation cause floor to ceiling mold?
No.
Black film on walls and ceiling on only one side of house?
The black film on walls or ceilings is probably black mold. This means that moisture is getting into the area. You might check to make certain that a pipe does not have a small leak in that area.
What are the five components of a state?
Walls, floor, ceiling, and ceiling
What causes black mold?
black mold is a fungus that grows particularly well in high cellulose type materials such as walls, carpeting, ceiling tiles, etc. It is caused by extended damp conditions brought on by poor air circulation and is very dangerous to your health.
how do i remove mold from vinyl?
how do i remove mold from vinyl
You have orange powder like mold growing on your shoes and black mold on your clothes and walls of your closest is this dangerous and how do you get rid of it?
The mold on your shoes is likely caused by moisture. Try to dry your shoes thoroughly and use a disinfectant spray to kill and prevent further growth. The black mold on your clothes and closet walls can be toxic and may cause health issues. It's best to call a professional mold removal service to safely clean and remove the mold.
Where is the Sistine Chapel painted?
Ceiling and walls.
What chemcals I can use to Kill potential mold behid the damp walls?
What chemcals I can use to Kill potential mold behid the damp walls?”
