0
Add your answer:
Earn +20 pts
Do all gas fireplaces have a pilot light?
All unvented gas logs must have a safety pilot. Also all vented gas logs that are for propane must have a safety pilot. Vented gas logs that use Natural gas do not require safety pilots as the pressure is half that of propane although I would still recommend safety pilots on all installs.
What is a thermogenerator on gas logs?
Also known as a thermocouple- device generates very small eletrical current from heat of the pilot light, which permits gas valve to open only when pilot light is lit.
Does gas leak when the pilot light goes out on a heater?
No it shouldn't, There is a sensor that turns off the gas if the pilot flame goes out, The only way it would leak gas is if it as a faulty sensor, or a peice of depree gets in the gas line
Why does the home gas furnace blow cold air?
Perhaps the pilot light is out and the gas has been turned off at the valve.
Why does your pilot light keep going out on the direct vent gas water heater?
My direct vent furnace pilot light issue was the glass viewing port was missingallowing room air to blow out the pilot light. Replacing the missing glass which stopped the draft, fixed the problem.
Is a gas stove dangerous when pilot light is removed?
A gas stove can be dangerous without a pilot light as it can allow gas to build up in the kitchen, which can lead to a potential explosion if ignited. It is important to exercise caution and immediately contact a professional to relight the pilot light.
How do you reignite a boiler?
There should be a sticker on the boiler or the gas valve telling you how to relight your particular model.
If I turn the gas on but the pilot light isn't on does the gas keep running?
On a stove it will. On a modern, code-compliant water heater, space heater or furnace it will not, because these modern appliances have electric valves that will not open if the pilot flame goes out. Once the pilot is out, the only way to get gas to flow is to push the pilot button in on the gas valve and relight the pilot flame according to the instructions. You can check for gas leaking from the pilot burner or main burner by smelling for the scent of gas, as natural gas and LPG (propane) have an odorant added to allow you to detect their presence. (Do NOT use a flame or spark to test for the presence of gas!)
How do relight your pilot light on a whirlpool stove?
Simply put, no. Some gas stoves use an electrical system for ignition. Others have the typical pilot light that needs a real flame to manualy light it.
If one the burners of a gas oven is not emitting fire, when turned on, how would one go about fixing that and getting the burner to work?
Your pilot light is most likely gone out.You can relight it yourself though this can be DANGEROUS.Lift up your stovetop and see if you have all four pilot lights.If you do this is not the problem.Keep that burner off because natural gas can be deadly and call a pro to fix it.
How do you reignite a gas furnace?
You should not be relighting the furnace, if your unit does not have an automatic ignitor you merely need to relight the pilot light and the instructions to do that specifically for your equipment can be found somewhere on the unit.
Who do you call to fix the pilot light on your natural gas fireplace?
A competent HVAC Contractor in your area
How do you relight the pilot-light of the home heating furnace?
Turn the knob on the top of the gas valve to "Pilot" and hold it down. Put your match or lighter near the pilot and it should light. Continue holding the knob down for about 30 seconds then release, and the pilot should stay lit. If it goes out then you may need to replace the thermocouple (the gold color rod that the pilot flame burns on) or have the pilot cleaned if it has a yellow flame.
How do you replace a thermocouple on a gas fireplace?
To replace a thermocouple on a gas fireplace, first turn off the gas supply and wait for the fireplace to cool down. Locate the thermocouple near the pilot light and unscrew the old one from the gas line, then install the new thermocouple by screwing it in place and reassemble the gas line. Finally, relight the pilot light and test the fireplace to ensure the new thermocouple is working properly.
What is the risk of an explosion if pilot light on water heater goes out?
When pilot light goes out, gas flows out of the pilot light nozzle. If out has continued for a long time, a gas cloud can develop around the furnace. When you go to light the pilot light, you'll ignite this gas cloud and make a big fire ball. If your basement is drafty, you might never get a huge cloud of gas hovering around your furnace. When you notice that your pilot light is out, you should shut off the gas to the furnace and allow any stray gas to dissipate before you turn the gas back on and light the pilot light. alliedallcityinc.com
How do you replace a thermocouple on a hot water heater?
To replace a thermocouple on a hot water heater, start by turning off the gas supply and allowing the unit to cool. Remove the old thermocouple by unscrewing it from the gas control valve and pilot assembly. Insert the new thermocouple in the same position, tighten it securely, and relight the pilot light before turning the gas supply back on.
What are common problems with pilot light for natural gas furnace when it takes 3 to 4 cycles to start or light.?
Rust and deposits,,,,,,,, Best thing to do is have it cleaned PROFESSIONALLY
