0
The bimetallic strip is made of two different metals, bonded together. The two metals have different temperature expansion coefficients, so when the bonded assembly is heated or cooled, it curves one way or the other, allowing a switch to be opened or closed.
Add your answer:
Earn +20 pts
What is a bimetallic coin?
A bimetallic strip is often used in thermostats because it is quite simple to make and responds predictably to changes in temperature. The bimetallic strip is pretty much what it sounds like - a strip made from two metals. Inthermostatsit is common to make one side out of steel and the other out of copper - then bond them together. they are formed into a curving spiral. Different metals have different coefficients of thermal expansion so as the temperature changes, the spiral strip either curls up or uncurls as one side expands or contracts more than the other. The control isattachedto one end of the strip so that as it curls or uncurls, it rotates the control.Sometimes the control is a simple mercury switch that closes a contact whenrotatedone way and opens the contact when rotated the other. Sometimes one end is attached to a power source and the other end is connected to an electric contact, which moves as the strip curls and uncurls.You can also attach it to a pointer and have it point to temperatures on a dial.
How could a bimetallic strip perform a practical task in life?
bimetal stip is next to the contacts it make your oven,iron and air conditions unit work that is when ever the contacts touch from how high you put it and it heat up and the iron and brass bends
Is using AC and ceiling fans together a good idea?
Answer Absolutely! This way your air circulates better and will cause the air conditioner to work less. Make sure that they your electricity can handle so much use on one circuit, otherwise you may blow that circuit.
What is different about the two kinds of metal on the bimetallic strip of a thermostat coil?
the two dissimillar metals have different heat coefficient.on the application of heat the two mtels which are comonly bonded in shape of spiral or helix expands unevenly.that's results in diferential expansion that's unwind the expansion this differential expansion is sensed by the pointer and the differentail exapansion of the metal is shown in terms of pointer deflection on the scale as measured value............. the two dissimillar metals have different heat coefficient.on the application of heat the two mtels which are comonly bonded in shape of spiral or helix expands unevenly.that's results in diferential expansion that's unwind the expansion this differential expansion is sensed by the pointer and the differentail exapansion of the metal is shown in terms of pointer deflection on the scale as measured value.............
Ideas for a elementary 4th grade science fair projects?
For a fourth grader, you can do a standard baking soda/ vinegar volcano or something like using alcohol to show the colors a black marker is made up of. You could also look on line to try to make a battery out of a fruit or make a small circuit
How is a bimetallic strip used in a thermostat?
A bimetallic strip is used in a thermostat to control temperature. As the temperature changes, one of the metals expands or contracts more than the other, causing the strip to bend. This bending action either opens or closes a switch to turn the heating or cooling system on or off, helping to maintain a set temperature.
Why do you use a bimetallic strip in fire alarms?
Bimetalic strips are composed of two metals with different properties in the case of fire alarms it is the difference in thermal expansion that is important. When the strip is heated (due to a fire) the strip bend and can complete an electric circuit setting off the alarm.
How could a bimetallic strip be used to help in every day life?
A bimetallic strip can be used in thermostats to control temperature by bending due to temperature changes. This can be seen in appliances like ovens, refrigerators, and irons where the bimetallic strip acts to regulate the temperature setting.
How can a bimetallic strip and a bell be used to make a fire alarm?
It can be used to make a fire alarm by attaching it to another metal object i.e a nail and and adding a buzzer and some batteries and heating a busin burner underneath the bimetallic strip. This will make the strip curl upwards and touch the nail. This will make the buzzer go off
How a bimetallic strip and a bell can be used to make fire alarm?
It can be used to make a fire alarm by attaching it to another metal object i.e a nail and and adding a buzzer and some batteries and heating a busin burner underneath the bimetallic strip. This will make the strip curl upwards and touch the nail. This will make the buzzer go off
How could a bimetallic strip be used to make a thermometer?
A bimetallic strip can be used in a thermometer by attaching one end to a pointer and placing the other end in contact with a temperature-sensitive substance. As the temperature changes, the bimetallic strip will bend due to the different rates of expansion of the two metals, causing the pointer to move and indicate the temperature on a scale.
Why are two different metals used to make a bimetallic strip?
Two different metals are used to make a bimetallic strip because each metal expands and contracts at different rates when heated or cooled. This difference in thermal expansion causes the strip to bend, making it useful in applications such as thermostats and thermal switches.
Appliances bimetallic strips are used in?
Bimetallic strips in appliances are commonly used in thermostats to regulate temperature. As the temperature changes, the bimetallic strip bends, causing it to open or close an electrical circuit to control the appliance's heating or cooling functions. This mechanism helps maintain a consistent temperature within the appliance.
Why doesn't the bimetallic strip on frying pan control work?
What happens is one of two things:The mechanical components stickThe strip has one layer of metal corrode or flake off.It is the two different expansion rates of the metal that make the strip work.
Why are two different metals needed when making a bimetallic strip for a thermoteter?
Two different metals are needed in a bimetallic strip to take advantage of their different thermal expansion properties. When heated, one metal expands more than the other, causing the strip to bend. This bending action is used in thermometers to measure temperature changes.
A bimetallic strip will bend when heated because?
a bimetallic strip consists of two different metals with different thermal expansion coefficients. When heated, these metals expand at different rates, causing the strip to bend due to the resulting difference in length between the two metals.
A sentence using the word circuit?
try to make a path of circuit
