you cut the highlighter in half and take out the felt tip and you put it in a small amount of water. After you put the felt tip in a small ,amount of water you put it under a black light and the water should glow. The best color to use is a yellow highlighter.
It is a fuse or a breaker. The wire inside the fuse will burn out and will need to be replaced once the fault has be corrected. A breaker is designed to click open, so breaking the circuit.
break it.
In switch language, open means to disconnect, or break the circuit. Some people call this "turned off". Closed, is to connect, or make the circuit. Some people call this turned on. In the case of a normally open switch, the switch is open (off) unless something takes action on the switch. Pushes a button for example, or holds a magnet near the switch, or other active force. A normally closed switch is closed (on) unless some force causes the switch to be opened.
Don't break the brake handle!
open it
To take apart a highlighter, you typically need to remove the cap and grip section. Then, gently pull the ink cartridge out of the barrel. Be careful not to break any delicate components during disassembly.
A typical highlighter weighs about 10-15 grams, depending on the brand and type of highlighter.
the first highlighter was used in Ireland
Wash it off. The only thing is it may be an irritant, but it won't kill you.
A highlighter is "un surligneur" (masc.) in French.
a highlighter is called 'un surligneur' in French.
To take apart a highlighter, first look for any clips or caps that need to be removed. Then gently twist or pull the highlighter in different sections to separate the body. Be cautious not to break any internal components or spill the ink in the process.
you use a highlighter on every piece of text
Press the highlighter and click no fill.
The Highlighter was invented in 1962, In Japan, by a man by the name of Yukio Horie.
Highlighter ink will not harm you as long as you don't have it inside your skin.