Firefighters use many methods to put out fires. The extinguishing method depends on four factors, which are called the fire tetrahedron.
Imagine a pyramid with four sides. The sides are:
If you remove one of those four factors, the fire will go out.
For instance when fighting a class A fire (ordinary combustibles like wood and paper), the best method is often to remove heat. Firefighters do that by applying water to the fire. Also, once enough water is applied, it can also remove oxygen from the process by smothering the fuel.
Fire blankets can be used on any small source of fire. They are typical used when traditional fire extinguisher are not appropriate for example; an oil fire were the only available extinguisher is water based. I you are not sure whether or not to use an extinguisher or a blanket don't tell somebody or activate an alarm.
Firefighters primarily use hand tools to build a fireline that separates burning fuel from unburned fuel. The typical tools consist of a pulaski and shovel, supplemented by different types of hoes (McCloud, hazel hoe, etc) and cutting tools (brush axes, chainsaw, etc).
Some firefighters have the good fortune to have water available, either because they're close to urban areas, or they have pumps that can draft (suck) water from natural sources and direct the water through hoses to the hot spots.
Aerial water and fire retardant is very expensive and is only used when necessary to protect human habitations, valuable timber or other economic or cultural interests.
A fire blanket either completely surrounds a burning object or is placed over a burning object and sealed closely to a solid surface around the fire. Whether the blanket is placed on top, or surrounding it, the job of the blanket is to cut off the oxygen supply to the fire, and put it out. In using a fire blanket, it is important to protect the hands
Fire requires three things: heat, fuel, and oxygen. If you take one of them away, then the fire will stop. By wrapping a heavy blanket around a burning object, it blocks oxygen in the air from getting to the fire and the fire goes out. This is why a fire blanket is standard safety equipment in school science labs.
The fire triangle is fuel, oxidant (or oxygen), and ignition source. When you use a fire blanket to put out a fire, you are cutting off the supply of fresh oxygen (the oxygen still under the blanket gets consumed as the fuel burns).There are however various components that can burn with no oxygen present.A fire is in a way no more than a powerful chemical reaction making a lot of heat.Heat itself will increase the rate of the chemical reaction and this is often why we consider a fire to be out of control. Common for all fires is that they need something to react with. If one remove the reactant from the fuel, then the fire stops. What the reactant is depends strongly on the fuel at hand.A normal approach in order to put out a fire is to use vast amounts of water.This works quite effectively in two ways. Firstly by lowering the temperature. secondly by forming steam of which removes oxygen (reactant).There are however fires that very well burn vicariously even when submerged totally in water. Such a fire can occur when we burn the metal Magnesium.Under normal circumstances such a fire will only be put out with sufficient amounts of sand or salt. This will remove available oxygen or reactants and the fire will stop.Most fires can be put out if one have a fire extinguisher filled with Nitrogen. We normally say that nothing can burn in an atmosphere of pure Nitrogen. This is however not so when it comes to a fire with Magnesium. Magnesium burns equally as well with Nitrogen instead of Oxygen.
Radiated
he has made a safe way to see how chemicals react when they have been over the fire for a certain amount of time
A fire blanket removes the oxygen supply from the fire when it is placed over it, suffocating the flames and extinguishing the fire.
A fire blanket is used to extinguish small starting fires. It's made of fire retardant material such as fibreglass, kevlar or just wool treated with a fire retardant fluid. You place a fire blanket over a fire to smother it.
A fire blanket either completely surrounds a burning object or is placed over a burning object and sealed closely to a solid surface around the fire. Whether the blanket is placed on top, or surrounding it, the job of the blanket is to cut off the oxygen supply to the fire, and put it out. In using a fire blanket, it is important to protect the hands
A fire requires oxygen in order to continue to burn. Placing a blanket over the fire robs it of the necessary oxygen, and thus helps to extinguish the flame.
putting over fires as it gets rid of the oxygen the fire needs to burn
Because you dont put water on a oil fire or a explosion will happen. This includes a grease fire... Dont put it out with water... If you put a fire blanket over it... It will put it out the safe way E.G. Smuther it.
There are 3 possible solutions to this problem. Put a fire blanket over it, pour water on it, or use a fire extinguisher.
Fire requires three things: heat, fuel, and oxygen. If you take one of them away, then the fire will stop. By wrapping a heavy blanket around a burning object, it blocks oxygen in the air from getting to the fire and the fire goes out. This is why a fire blanket is standard safety equipment in school science labs.
2,000 degrees in the fire blanket.
A fire blanket is a lab safety device made of fire-resistant material that can be thrown over a small fire to cut off its oxygen supply and extinguish it. It is a commonly used tool for fire safety in laboratories and other settings where fires may occur.
throwing a blanket over a small contained fire stops oxygen to the fire .to stop a fire you need to take out one of the three elements that are needed for a fire to burn witch are heat /oxygen/fuel
When you smother a fire with a fire blanket, you remove oxygen, one of the elements needed for fire to burn. By restricting the supply of oxygen, the fire is deprived of the required component to sustain combustion, leading to its suppression.