no
There isn't a turbo kit due to the high compression of the N/A engine. There is however a low pressure supercharger kit by Speed Force racing.
The compression is done at up to 10 bars. The air horn kit consists of an air horn and a compressor. The compression is done at up to 10 bars. The air horn kit consists of an air horn and a compressor.
A roller bandage can be used for compression or to immobilize an injured body part.
Head gas kit is a seal which seals the compression your engine make. you just remove the head and remove the gas kit and do use any metal as it will ruin your engine.Replace it with you new gas kit.
Go to an auto parts store and ask the guy if you can use their compression test kit. Pull the spark plugs one at a time and connect the kit to the slot where the plug came out. Have one person crank the engine while the other looks at the gauge on the tester. Replace that plug and move to the next one. All of the cylinders should test about the same. If not, you are not getting compression in one of your cylinders. If didn't know this much and you are not getting compression then its time to get a mechanic because you're going to have to take your engine apart to fix this.
.80 over is probably the biggest you could go and not break the bank. .80 big bore stroker kit with high compression wiseco piston would give you the power you are looking for
As said earlier you can turbo any engine, but for the FSZE engine... it is already high compression engine so adding a turbo to it wouldn't make much sense without swapping out the pistons for low compression pistons. e
Stronger Scooters Bars, Stronger Deck, Compression kit, Betters Bars. 110mm Alloy Core Wheels.
what does a compression program do? what does a compression program do?
Get the compreesion spec, then aquire a compression leak down kit. Test compression, make sure it is in or close to spec. If compression is fine, try an NGK BR series plug, and clean then adjust the carb to spec. If the engine does not fire, check for spark and fuel flow. If the engine still does not fire, take it to a service pro. If all above systems are fine, then you should have it running in no time.
You can purchase a kit at most auto parts stores that includes an air fitting and a compression tool to remove the locks and change the seals.