0
Add your answer:
Earn +20 pts
Where should submersible pump be placed or installed in ground water well?
There are a few parts to an answer. How deep is the water in your well? Is there sludge or sediment at the bottom of the well? How deep is this and how much is clean water? How long is your pump? How long is the motor housing? I just placed a 70cm pump, motor 35cm, in 250cm if clean water. 20cm of sludge. The bottom the motor housing was placed about 40cm above the sludge which means there is about 75 cm of clean water below the water inlet and 175cm of water above the pump. It will take many years for the sludge to rise and even in low water periods I should stay in operation.
How much water is evaporated per ton of sludge sent to the drier?
The amount of water evaporated per ton of sludge sent to the dryer will vary depending on the moisture content of the sludge. On average, a dewatered sludge may contain around 70-80% water. The drying process can typically remove around 70-80% of this water content, resulting in 14-16 gallons of water being evaporated per pound of sludge.
What can you use to get sludge out of your car?
You can use plain water to get sludge out of your car radiator. You can use Marvel Mystery oil to remove sludge from the oil pan.
What is a sludge judge and where can I find one?
A sludge judge is a device used to measure the depth of settled solids in a tank or lagoon, typically in wastewater treatment facilities. You can find a sludge judge at online retailers that specialize in environmental monitoring and sampling equipment, or through companies that supply equipment for water and wastewater management.
What do you mean by dewatering sludge?
Removing the water content (dewatering) of the sludge will dry the sludge, making it lighter and easier to move and reuse. (Reuse depends on whether the sludge is toxic and has to be stored safely or, as in human sludge from a sewerage farm, used as fertilizer by farmers, etc ).
What is lime sludge?
Lime sludge is a byproduct of the water treatment process that involves adding lime to water to adjust its pH level. It is a soft, white, chalky solid that settles at the bottom of water treatment tanks. Lime sludge needs to be properly disposed of to prevent environmental contamination.
Do we put water in the roaster oven when cooking chicken?
Yes to keep the chicken moist in side
How much water is in sludge from a sewage treatment plant?
The water content in sludge from a sewage treatment plant typically ranges from 70% to 98%, depending on the type of treatment process used and how dewatered the sludge is. The remaining percentage consists of solids, which can include organic matter, inorganic materials, and pathogens.
What level does nidoking learn sludge bomb?
Well, Nidoking doesn't learn Sludge Bomb by LEVEL UP. But he CAN learn it by TM36.
Why does sludge build up in my food disposer?
well if you weren't a selfish pig and ate all of your food their wouldn't be any sludge!
What is cold water sludge?
Cold water sludge is a suspension of fine particles in water that has a lower temperature, typically below room temperature. It can form in systems where water and sediments mix, such as in rivers or industrial settings, and can cause clogs or blockages in pipelines and machinery. Treating or removing cold water sludge is important to maintain efficient operation and prevent damage.
What causes black sludge in your water lines?
Black sludge in water lines can be caused by the accumulation of organic matter such as algae, bacteria, or mold. It can also be a result of corrosion of metal pipes, especially if the water is acidic or contains high levels of minerals. In some cases, the sludge may be due to the growth of biofilm on the inner surfaces of the pipes. Regular cleaning and maintenance of the water lines can help prevent the buildup of black sludge.
