Wiki User
β 12y ago57.6 because F=2C
therfore use the equation (1.8xC)+32=2C and solve for C
Wiki User
β 12y agoA Fahrenheit thermometer will give a reading that is twice that of a Celsius thermometer at -40 degrees, as this is the point where the two temperature scales intersect.
Temperature readings are typically measured on a scale, such as Celsius or Fahrenheit. To get a higher reading on a thermometer, the temperature must increase on that scale. For example, if you have a thermometer in Celsius and the current reading is 20Β°C, the temperature would need to increase to above 20Β°C to see a higher reading.
Negative forty degrees
Temperature is typically measured using a thermometer, which can be digital or mercury-based. Temperature is usually recorded in units such as degrees Celsius or Fahrenheit. The thermometer is placed in the environment or substance being measured, and the reading on the thermometer indicates the temperature.
160 Celsius = 320 Fahrenheit
Apply the Fahrenheit to Celsius conversion in revers: Multiply Celsius temperature with 9 and divide it by five. Then, add 32 = Fahrenheit temperature.
The reading on a thermometer is the current temperature. Thermometers measure the temperature of a substance or environment and display it on the scale in degrees Celsius or Fahrenheit. Temperature readings can help determine if conditions are hot, cold, or in between, depending on the scale being used.
The temperature at which Celsius and Fahrenheit give the same reading is -40 degrees.
The temperature reading that is the same on both Celsius and Fahrenheit scales is -40 degrees.
The numerical reading on the Fahrenheit thermometer may be higher, lower, or equal to the numerical reading on the Celsius thermometer. -- If either one reads below -40°, then both do, and the Fahrenheit reading is the lower one. -- If either one reads above -40°, then both do, and the Fahrenheit reading is the higher one. -- If either one reads -40°, then they both read -40°. -- Whatever the temperature, the Fahrenheit reading is always 32° greater than 1.8 times the Celsius reading.
A thermometer measures temperature by using a substance that expands or contracts with temperature changes, such as mercury or alcohol. As the substance heats up or cools down, it moves along a scale marked on the thermometer, providing a reading of the temperature.
To calculate the mercury rise in a thermometer, you need to subtract the initial temperature reading from the final temperature reading. The difference between these two readings represents the mercury rise in the thermometer. Make sure to use the units of measurement (usually degrees Celsius or Fahrenheit) in your calculation.
The temperature reading for a bimetallic thermometer when calibrating in an ice water bath should be 0 degrees Celsius (32 degrees Fahrenheit). This is because ice water has a defined temperature of 0 degrees Celsius, which is used as a reference point for calibration.