Had the same problem. The immobilizer light just stop blinking. Couldn't start the vehicle. Key re-coded. Problem solved
If the fan does not stop running after the engine is shut off in the Renault Scenic 2000, there could be a problem with the fan relay switch. The fan relay switch is located in the fuse box.
Stop looking, it doesn't have one!!
A faulty fan relay switch is likely the problem if the fan continues to run after the engine is shut off. Production for the Renault Scenic began in 1996.
How can I reset engine light on renault master van 2012 125bhp
A problem we found was that the nut holding the wiper in place had come lose all we had to do was tighten the nut and the wipers worked
dont no
you need a new alternator/belt
Alternator bad or wiring fault to alternator.
To reset the workshop stop light on a Renault Midlum truck, you will typically need to use a diagnostic tool or software specific to Renault vehicles. This tool will allow you to access the truck's onboard computer system and clear any fault codes triggering the workshop stop light. It's important to address the underlying issue causing the light to come on, as simply resetting it may not solve the problem in the long term. If you are not familiar with using diagnostic tools, it may be best to consult a professional mechanic or Renault dealership for assistance.
leave the wiper stalk/control set down one stop from off when you switch off the engine, it will then work automatically when it rains and the engine is running
Your alternator is defective and not recharging the battery. Have the alternator checked.