The reset button below the instrument cluster resets the trip A and trip B mileage counter www.lextechautomotivellc.com
2005 Malibu classic you ste to trip then push and hole in the button on the speedometer
Left 'trip button' is actually the clock set stick just below your speedo the button/stick to the right is the right trip button.
Press and hold the small black button on the right hand side of the dashboard for about 5 seconds
When you see the Change Oil light on, push and hold the button just like you would to reset the trip counter
if you press the button in on your right hand stick on steering wheel and hold it in it will reset youre trips in the computer
Next to the odometer is a button. Press it to switch between odo and trip. While in trip, hold it to reset the tripometer.
Do the following steps: Move start switch to position "2". Within the first 4 seconds after moving the start switch to position 2, press the reset button for the trip counter twice within one second. The display for the service request is activated for about 10 seconds. Within these 10 seconds, move the start switch into position "0". The service request continues to be displayed. Press the reset button for trip counter and keep it pressed. Move the start switch into position "2". Continue to hold the reset button for the trip counter pressed until the signal sounds and the new start distance appears in the display (it takes about 10 seconds).
Move start switch to position "2". Within the first 4 seconds after moving the start switch to position 2, press the reset button for the trip counter twice within one second. The display for the service request is activated for about 10 seconds. Within these 10 seconds, move the start switch into position "0". The service request continues to be displayed. Press the reset button for trip counter and keep it pressed. Move the start switch into position "2". Continue to hold the reset button for the trip counter pressed until the signal sounds and the new start distance appears in the display (it takes about 10 seconds).-GMA
if the service light has come on, you can reset this by pressing the odo trip meter reset button on the dash. that's the one you use to reset the trip counter to zero. put key in ignition and turn to position 2, press and hold reset button for 10 seconds. light will go out.
Turn the car to the on position. Hit trip reset button until it say trip. Now turn the key to off. Hold the trip button and turn to on. Release trip button after the needles reset.
The button on the steering wheel marked "step" changes the odometer to trip 1 and trip 2. You can also reset these 2 different trips to zero as needed. When you press the trip button multiple times, you will also get the outdoor temperature.