It is threaded into the master cylinder. If you can't reach from under, remove the fuel tank to expose the master cylinder and brake light switch.
The brake light switch is found behind the 1998 VW Beetles brake pedal. Reach it by removing the lower dash console to gain access to the nut holding the switch in place. Remove the nut then then the switch.
There are some wires coming from your master cylinder, under the floorpan on the driver's side... those are you brake light switches
where is brake light switch
You can try to reset your brake light switch by unplugging the brake light switch and plugging it back in. If that does not solve your problem you will need to replace the brake light switch.
a switch that is trigered to light up the light when the brake pad is pushed in
The Chevrolet Colorado brake light switch is quite simple to change. The brake light switch simply plugs in and out.
The brake light is controlled by a relay switch. If the relay switch is bad the brake lights will stay on. The brake light switch simply plugs in and out. Unplug the brake light switch until you can replace it.
Above the brake pedal. If your main brake lights dont work but your third center brake light does, then the brake light switch is not the problem. Its is the turn signal switch.
The brake light switch can be found below the dashboard on the drivers side of the passenger compartment. The brake light switch simply plugs in and out.
The brake light switch is behind the brake pedal.
The brake light switch is not air actuated.