anti-roll bar is used to reduce body roll
it has a roll bar that is bolted to the body its called a sport bar not much protection compared to a roll bar welded to the frame
form_title=Install a Roll Bar form_header=Roll bars can be a valuable source of protection in the case of an accident. Do you use this car for going off road?= () Yes () No Will you need just the roll bar or a full roll cage?= () Roll Bar () Roll Cage Is your car a convertible?= () Yes () No
If your roll bar is in the up position after you hit a bump or something like that, you only need to press and hold the switch(for the up and down position of the roll bar)pressed in for the up position for about 5 to 10 seconds. Doing this you reset the roll bar. After that the roll bar will work as normal Roger(Norway)
An anti-roll bar is a bar which is stressed to reduce the effect of a car leaning to one side during cornering.
To improve handling by reducing body roll allowing the car to corner faster with more control. It is a torsion spring that attaches to (normally lower control arms of that axle, be it front/rear. As the car enters the turn, it starts to lean/roll, and the spring counteracts it.
roll bar
Anti-Roll Bar or Sway Bar
the reason the roll bar won't go down is ,either roll bar was activated by an impact or it was activated if vehicle was jacked up with keys in the ignition. You will have to do a manual reset on the roll bar to reset. this is done with the tool provided in your tool kit.
The SL-Class is a luxury two-passenger sports car with a convertible top. The SL-Class is offered in two trims; the SL500 and the SL600. The SL500 has a 302 hp 5.0L V8 engine while the SL600 has a 389 hp 6.0L V12 engine. Both trims use a five-speed automatic transmission. The SL-Class has a deployable roll bar behind the seats which reacts the instant it senses the car is in serious danger.
Sway bar has other names as anti-roll bar or stabilizer bar and is present in automobile suspension. The purpose of a sway bar is to keep the body roll of the vehicle at low level during a sharp turn.
The purpose of roll bars is to prevent a vehicle from rolling over. It contains a torsion spring bar that is also known as a sway bar to achieve this.