if your wanting to change the colour of the speedo cluster you need to purchase the peugeot 307 smd led kit from www.crazyleds.co.uk and have a lot of patience and soldering skills
To dismount the dashboard in Peugeot 107 you need the tool box. The tool box will help you in opening the bolts and nuts and dismount the dashboard.
If you mean the lights behind the clock and the climate controls, they are T05.You will find all types of lights used in your Peougeot 206 in this site: http://206gti.net/lightsThere are also tutorials on that site on how to replace the bulbs.
you need new clocks or (map sensor) or speed sensor together :-( had this prob my self
If you want to change the bulbs behind the speedo dial, then there are four screws, two at the top and two at the bottom of the dashboard dials. Then remove the cover rim that holds the dial and you should find again another four screws, two to the left and two to the right. Once you remove those, you should be able to pull the dial and you will see there are two cable connectors and the speedo meter cable sticking at the back. Carefully pull to the back the cables and speedo cable by pressing the holder pin. At this point you should have the speedo dial detached and at the back you should see the bulb connectors that you have to twist to the left and pull out. There are many of them so you might need to check if they light before you disconnect the cables.
Removing the dashboard is not really a difficult job as long as you do it in a slow methodical way. First remove the top and bottom cover from the steering column. Then loosen the screws holding the front cover from the dash. Remove this cover, this will expose the screws that hold the clocks in place, remove them. The clocks should now be able to be pulled out from the dash. If not then the speedo cable need to be removed. Once the clocks are out you will see were the bulbs are on the back and you will be then able to replace the bulbs.
Refers to the battery in the car key! So it means you will need a new battery in the electronic key.
Are you talking about the dashboard 'glow' itself? That's not a light bulb, but a luminous panel that the dashboard information is printed on (things that don't move, like the speeds on the speedo or the revs on the tach). If that has gone out, you'll likely need to replace the entire dashboard...
If the bulbs are working then you just need to change te fuse.
Standard bulbs will work fine for dipped headlights. They will not shine as bright because of the darker tint. If visibility is still an issues the lights can be upgrading for better performance.
To replace the dashboard lights on a 1994 B2300, you typically need to access the instrument cluster itself by removing the trim panel. Once you have access, you can twist and pull out the old bulbs and replace them with new ones. Make sure to use the correct type of bulbs for your vehicle's dashboard.
You'll need to remove to plastic piece around the speedo. To do this I had to take the plate around the radio and a/c stuff loose because the edge of the speedo moulding fits underneath, be patient it's plastic. The speedo should pull straight out. On the back you will see little black knob's in several locations. They twist and they are tight so give it a good twist. You'll need 921 bulbs that just slide into the knob. Replace all while your there. The whole left side of my dash was out mine is a 1997 they should be similar.