Probably cause by a worn out/defective brake light switch.
There could be many causes to a brake light not working. It is best to replace the fuse, and the bulb and check the wiring.
Hub seal is leaking
Hey man/girl, ask a macanic. Mabie that will help u.
THIS VEHICLE THROWS A CODE WHEN ELECTRONIC WEAR SENSOR HITS ROTOR, CAUSING MESSAGE "CHECK BRAKE LINING", AND BRAKE LIGHT TO COME ON. THIS CODE MUST BE CLEARED IN VEHICLES COMPUTER BY OBD II OR EQUIV.
I want to know where the thermo switch of land rover discovery 1996 located in the car.
My 1995 Land Rover Discovery was stuck in "Park" because the brake light switch was faulty. Ordinarily, you must step on the brake to shift out of Park. If you depress the brake pedal and your tail-lights do not light up, it's likely because the switch is broken. The switch is located near the hinge of the brake pedal; underneath the steering column. Your local auto parts store should have a replacement; I bought two at $10 each... and keep the spare in the glove box in case this happens again.
Take it to the Land Rover dealer or any rv dealer
The Range Rover Classic was built by the company Land Rover from 1970 to 1996. Land Rover is a British car maker. The Range Rover Classic is a 4x4 luxury SUV.
Check out this post: http://www.mavromatic.com/2007/03/diy-part-i-replacing-rear-rotors-and-brake-pads-on-a-land-rover-discovery-ii/
It depends on what model of land rover, how it is driven, and on several other factors, but for the land rover discovery with automatic transmission it will probably be around 11-13mpg during normal driving.
Take it to HiFlex Engineering S Yorks 01909 568681