Did you ever find out what caused this? having same issue when turning left.
A sensor that is activated by a lack of light (the dark). Usually these can be found in night lights that turn on when the lights are turned out.
yes it is a setting that has to be turned on at the dealership.
Put the key in. Turn it to position two.(where all the dash board lights come on, dont start the car) Leave the key in that position for 45 seconds. The fault should clear provided your sensor circuits are complete.
Usually ECT or engine coolant temp sensor. That's what tells the engine computer to turn on the fans.
This means that your indicators or hazzard lights are turned on, OR if you are travelling over rough surfaces such as corrugations at a speed above 40km/h, there is some sort of inbuilt warning device that tells everyone you could be out of control. To turn them off you need to stop and turn the engine off.
When you are placing motion sensor lights, you need to take into account the trees and bushes. Also placing them in places where they will be able to turn on if the sensor is triggered.
Will have to go onto a Land Rover computer, or aftermarket version. The fault will most likely be a seat belt pre tensioner needing replacement.
Hold the reset button
The lights will automatically turn off in the day time. Automatically turn on at night. they are controlled by a light sensor, it determines if you need the lights or not. If the lights go on and off randomly not matter what the light conditions are, you may need to have a mechanic check out your light sensor.
Set a body of suitable weight on the seat.
Most likely the room has some sort of motion sensor to tell if someone is present. A heat sensor can tell if a person is in the room by the heat generated by the human body. A sound sensor can respond to noise made by a person walking, talking or otherwise. Either will work. The triggered sensor can turn on the lights or anything else electrically. The lights are usually attached to some kind of timer so that if no activity is detected in the room for a while, the lights are turned off until the next time the sensor is triggered.