Press and hold the trip reset button, then turn the ignition on. Turn off and release the trip button.
VW agents refuses to devulge this information over the phone.
They want to service the car for over R1600 and then only will they reset the button.
When I service it myself then I know it was done properly and it only costs me R450.
what service kit is needed to service a 2006 citi golf that has 100000 km on the clock
This is a service interval reminder. You can hold down the two buttons on your guage cluster at the same time. to reset each Service "interval reminder".
REMOVE POWER TO ECU FOR MORE THAN 3 MINUTES.
Answer : to reset the display do the following : with the ignition switched off, press and hold the trip meter reset button below the speedometer. Switch the ignition on and hold the reset buttton for at least 10 seconds. Dashes appear in the display. The service has been reset.
hey this is how you reset your dashboard push the odo meter in and turn the key release the odo meter than turn button of the clock to the right and it is donne
When the car is off, hold the reset button on the right side of the dash (0.0). Then turn the key on (not the engine) and once the service now words come out on the display press the minute(m) button on the right. That should turn the service now off.
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
1300 citi golf cam shaft torque settings
Yes (tell if not answer)
You have to set the belt timing in the VW Citi Golf 1300 without the markings.
Press and hold button "A" (positioned right of trip recorder display) Switch ignition ON The word "SERVICE" will appear in the trip recorder display Release button "A" Turn button "B" (positioned left of trip recorder display) to the right to reset the display Switch ignition OFF
take it to a garage and get it serviced and then they will turn it of son.