How to Reset the Service Interval on a Nissan Navara 2.5 Read more: How to Reset the Service Interval on a Nissan Navara 2.5 | eHow.com http://www.ehow.com/how_7479944_reset-interval-nissan-navara-25.html#ixzz0eMmf6XGz
mercedes b180
with the dealer computer.
AnswerCars today use an internal clock and the odometer reading stored when the last service interval was reset to count down to the next service interval.
This is a service interval reminder. You can hold down the two buttons on your guage cluster at the same time. to reset each Service "interval reminder".
unfortunately this is not possible without service workshop dignostic software
Dealer
It is quite simple. Turn ignition on, but do not start, press MENU, until display reads "service interval". Check the interval value displayed, and simply change it to another value using STEP. Press and hold RESET for approximately 3 seconds. Scroll further and display will read "change service interval". Select yes. Turn off ignition.
resetting requires special fiat/alfa/lancia computer Examiner
jaguar s type twin turbo diesel 2007. how to cancel "service required" indicator.
That can only be done by a service tech, the car is so new that it will not reset even if you disconnect the battery**the above is incorrect.To reset the service light, turn ignition switch to ON position with engine off. Observe speedometer display and tachometer multifunction display. When standard display appears press up or down arrow on the multifunction steering wheel until the FSS service indicator with one or two wrenches appears in speedometer display and service deadline appears in tachometer display.Now, press the reset button between the speedometer and the tachometer for about 4 seconds or until the tachometer display shows "Do you want to reset service interval? Confirm by using the reset button" To confirm hold down the reset button again until a signal is heard. the service indicator will display the reset interval. Reset is complete.
Press right hand button on display while spanner symbol is visible. The display will flash showing the interval setting - press the button to increase the service interval distance to the desired setting.