Switch off the ignition and hold IN the reset stalk under the speedo
Switch on the ignition the release the stalk.
Then TURN the stalk from under the taco clockwise and hold in position. Horizontal dashes should appear in the odometer.
Finally switch off the ignition whilst holding the taco stalk in the clockwise position.
The system has now been reset. When you switch on the ignition the service message should be cleared. Not a job for a one armed person ! Let us know if this works as I have never used this method.
The first method I understand will work with or reset the CAN-BUS to the "fixed servicing interval" mode ?on the release the stalk.
Then TURN the stalk from under the taco clockwise and hold in position. Horizontal dashes should appear in the odometer.
Finally switch off the ignition whilst holding the taco stalk in the clockwise position.
The system has now been reset. When you switch on the ignition the service message should be cleared.
mb 1004
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.
How do I reset oil indicator on bmw 325 1987?
I am sure this is not the proper way to reset the light, but I disconnected my battery cable for ten minutes and it fixed the problem.
Refer to the service and the user manual to see how you can reset the motor indicator on the Ford Mondeo 2.0 TDCI year 2004.
no
How to reset service light on a 2004 grand am
Do you know how to look at the tire pressure indicator and oil mileage indicator? It is on the same pages as those. Click on the "reset" buttons on those pages. Curt
How do i reset my service light on my 2004 Nissan
please help me!!!! How do you reset service light for a 2004 holden commodore Calais?
You have to have the owners manual, there are step by step instructions.
Proceed as follows to reset the service reminder indicator of your 2004 S60 : Ignition position I Press and hold in the reset button for the trip odometer Turn the key to position II within 2 seconds. Keep holding the reset button for the trip meter pressed in until a yellow lamp lights then reset button must be released. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded If the trip meter is already reset the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds. If the reset button for the trip odometer is not released within 4 seconds and before the light stops flashing, the service reminder indicator is not reset.