http://vbxmaxima.8m.com/ecu.html insert the above to your URL, and read at the bottom of the webpage.
Wiki User
∙ 18y agoA quick way to reset the check engine light would be to disconnect the battery for a short while
After reading the code, fixing the cause, you clear the code with a scan tool.
No reset button. Easiest way is to disconnect the negative battery cable for a couple of minutes, then reconnect. This will erase any codes stored in the computer. If everything is okay, the check engine light will stay off.
It will automatically reset itself after you have started the car 50 times after the problem was fixed, or sometimes if you disconnect the battery for a while it will reset itself.
I have heard if you disconnect the battery and let it sit for 20 min it will reboot the system when you reconnect the battery.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
The check engine light has to be reset with a OBD scan tool
You reset the check engine light with a scan tool after repairing the failure.
Check the gas sensor which may be located inside the gas tank on some models. The wire deteriorates that connects it to the gas pump.
hoe do you reset the check engine light in a 1995 land rover
how do i reset the check engine light on a 1999 acura 3.2tl
Go to auto zone and have the codes read for free. DISCONNECT THE BATTERY I disconnected the battery and the light did not reset On my '95 maxima I have to leave the battery disconnected for ~24 hours to reset the engine lignt. On my 1987 Maxima there is a button to push to reset the light. It is located underneath the passenger kick panel. On my 1999 Maxima I had to disconnect the battery for 24 hours : Go to autozone and have them clear it, easiest way, go to yoru local mechanic, he should have a obd scan tool, pay to have him remove it.