Trouble code P0441 means:Evaporative emission control system incorrect purge flow
use a vag com or just unplug and replug
Indicator lights on an Audi can be reset by a mechanic. The cars manual will also give instructions on how to reset this light as well.
The windshield washer system
by going to an AutoZone store and having them reset it with their handheld computer system that plugs directly into the information port under the dashboard on the drivers side
You will need to take the 2006 Audi A6 to a mechanic to have the service light properly reset. In some cases, a person can undo the battery to reset the light.
Best bet is to go to an Audi/VW dealership, and have them reset the radio by using a VAGCOM. The other option would be to purchase a VAGCOM yourself (http://www.ross-tech.com/). Of course if you have the actual reset code, you can enter it in manually. I can't tell you specifically how to enter it on the Audi radio, since I have an Audi Navigation system, and the controls are different. But it should be a combination of using Volume and Seek (or other keys the would allow for scrolling) to enter in the code.
maybe the plug under your seat has been unplugged, you will have to check the connections and then get the computer system reset using vagcom by an Audi dealership to see if that has resolved the problem
I Think its a main dealer job only as they use a guided function with the Audi VAS computer to reset the service display
its in the owners manual
tyleri
This warning light on the Audi A4 is for the traction control system. Usually it will turn on when the car is started and stay on for a couple of seconds. It flashes when the traction control system is activated while the car is in motion. If the light is continuously on, it means that the system is turned off or that a fault has occurred.