Adjust the sezt full forward. Remove rear bolts (requires a 12 point socket) Adjust the seat all the way rearward remove the front seat bolts. Tilt the seat rearward and remove the front connections to the module. tilt the seat forward and renove the rear connections to the module...Now pull the seat out and turn it upside down, There are two 7 mm screws in a metal bracket that hold the module on in the front . at the reart of the module it just snaps off the seat bar.
A Mercedes-Benz 300SE ignition control module can be obtained from most Mercedes-Benz dealerships. The ignition control module, can be purchased at most auto-parts stores.
The 4x4 control module is located behind the kick panel in the passenger side floor board. The module simply unplugs and you plug the new one in.
transmission control module.
how do you replace a wiper control module in dodge 1998
You can check the Mercedes-Benz air conditioning control module with a diagnostic tester. Hook the diagnostic tester to the diagnostic test port.
it should be on the passenger side kicker panel right above the computer. I just pulled my relay out to replace and everyone says that is for the ecm. electronic control module aka computer, or powertrain control module.
unplug it
The control module is on the passenger side up under the knee guard. You have to take out the front passenger seat, lay on your back and look up.
The power train control module is behind the kick panel on the passenger side floor board.
You can find the 2001 Buick Century Oddie control module on the passenger side firewall. The body control module will be near the bottom of the firewall.
The control module is located under the passenger seat.
The body control module, on your 1997 Oldsmobile, is located on the rear suspension. The module is mounted on the passenger side of the rear axle.