Want this question answered?
Be notified when an answer is posted
Chat with our AI personalities
Take the serial number off the radio and the vin number of the vehicle to a dealership and they will be able to get your code for any individual radio.
Remove the old antenna. Attach the universal antenna to the radio and replace the radio after finishing the task. Install the new antenna. Test to ensure the wiring works.
To replace a broken radio antenna on a 2004 GMC Envoy you need to unscrew the old antenna. Next, place the new antenna in the hole and screw into place.
You can replace an XM radio antenna with a CB antenna, a ham 40-meter mobile antenna, a cellphone antenna, a GPS antenna, a TV antenna, a wire coat hanger, a 6 GHz microwave antenna, or a chain of paperclips. However, since none of them is optimized to operate at the frequencies of XM radio, like the XM antenna is, none of the others will work as well. Most of them will likely be so inefficient at the satellite radio frequencies that when you use one of those, you hear nothing at all on your radio.
Responde a esta pregunta ...
You will have to replace that piece of the antenna cable.
If you don't have the manual (which will have the code in the section for the stereo) call the Delaership with the car's VIN and they can look up the safe code
A fixed antenna is wired directly to the radio on a 1996 Honda Civic. Pull the center console off and find the antenna wire behind the radio. Tie a nylon to the antenna wire and pull the old unit out. Tie the new wire for the antenna to the nylon so it can be properly snaked back.
Radio antenna can be translated as: Funkantenne Radionantenne
Remove the radio retaining cover. Remove the radio retaining bolts. Remove the wiring harness and the antenna cable from the back of the radio. Reverse the process to install the new radio.
remove wheel and remove the plastic liner inside the fender. remove the radio and disconnect the antenna wire. Tape another, 10' long wire to the end of the antenna wire. Unscrew the nut around the antenna from on top. pull the antenna and antenna wire out through the fender. Tape the 10' long wire to the new antenna wire and pull it back through the dash to the radio.
it is threaded onto the mast you must use a small wrench on the 2 flat spots on the base of the antenna. it has right handed threads