0
I've changed mine twice. You just need a hex (aka allen) wrench. It's easiest if you lift the trunk lid. Remove the hex screw that runs through the edge of the lens, pull the lens gently out, and then remove the bulb from the lens housing.
If I remember correctly, there was a mismatch between the bulb type listed in the manual and the actual bulb. It's probably easiest to do this in the parking lot of a parts store and carry in the old bulb.
Add your answer:
Earn +20 pts
How do you replace the license plate light on a 2005 Toyota Sienna?
how do u change the license plate light on a 2005 sienna
How do you replace the license plate bulb on a 2005 Lexus RX330?
Ask your car dealer...
How do you replace a license plate bulb on a 2005 grand prix?
Open your trunk the two inner bulbs are for your license plate twist and should pop right out
Where can you find the vin plate for a 2005 Volvo tractor truck?
The 2005 Volvo truck vehicle identification number plate can be found on the dashboard. The identification plate will be on the drivers side of the dashboard.
How do you replace the license plate light on a 2005 Chevy Cobalt?
Look above the license plate and find the bulb assembly, grasp the flat part turn it clockwise and pull it out, the bulb just pulls straight out.
Replace licence plate bulb on 2005 lesabre?
The license plate bulb on a 2005 Buick LeSabre is replaced by unscrewing the bulb cover and twisting the bulb. A new bulb can then be installed before putting the cover back in place.
What are the release dates for The Adam Carolla Project - 2005 The Fellowship of the License Plate 1-2?
The Adam Carolla Project - 2005 The Fellowship of the License Plate 1-2 was released on: USA: 11 October 2005
How do you change a license plate lamp in a 2006 Chevy Equinox?
how to change 2005 equinox license plate light i removed the screws but it didn't release
What is the license plate bolt size for 2005 Honda accord?
M6x1.00x20mm
How do you change a license plate light on a 2005 Chevy Tahoe?
Look on the back side of the bumper find the socket turn it, remove the bulb replace it, reverse steps to reinstall it
How do attach a front license plate to a 2005 Bonneville?
To attach a front license plate to a 2005 Bonneville, simply place bolts through the plate and through the bumper holes in the front bumper. If no holes exist, you can use self-tapping screws to create them.
How do you change the license plate light on my 2005 Chevy Colorado?
remove the bulb holder from behind the lense (inside the bumper) with a 1/4 turn. replace the bulb and reverse for reinstalation.
