0
What year? Which engine? Generally, the oil pump is located on the front of the engine, behind the crankshaft pulley. 1) Lock the flywheel in place. 2) Remove the accessory belts and crankshaft pulley. 3) Remove the oil pump. A workshop manual will aid greatly in providing proper endfloat specs and special re-assembly instructions for the particular engine.
Add your answer:
Earn +20 pts
Where is the oil dipstick on a 1996 Saab 900S?
It is Attached to the oil filler cap
How do you replace the oil pump on a 95 Saab?
the oil pump is on the front of the motor you have to take off the crank pully it is behind it there are two gears that you will need to replace
How many quarts of oil for 1996 Saab 900S?
4.25 quarts (4 liters).
Where is the oil dipstick located on 2003 Saab?
try taking off the oil filler cap at the top of the engine...on my '95 turbo 900s that's where it was, the oil stick was attached to the oil filler cap.
Where is the sump on Saab 9 5?
The SAAB will have an oil sump, specifically the oil pan collection for the engine oil and the fuel sump, the collection area for the fuel pump to pull from.
How do you change oil pump 1999 dodge?
Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.
Where is the engine oil dipstick on a Saab 9 3?
Have you opened the large oil filler cap at the top of the engine? Although I don't know about a 9 3, on my '95 turbo 900s that's where it was...built into the cap.
How do you Change oil Saab 9 3?
Remove oil sump plug, drain oil. Replace oil filter. Replace oil sump plug. Refil with Mobil 1 oil
How do you replace the oil pump on a 1999 Oldsmobile alero with a 3.4 liter V6?
how do you replace the oil pump
How do you replace oil pump on 1994 jeep?
You must remove the oil pan to access the oil pump. It is simple to replace once you get to it.
How do you replace the oil pump on a Mazda Protege?
Could you tell me how would you replace the oil pump on a Mazda Protege?
How do you replace the Toyota Camry 1998 oil pump?
You need to follow the same procedure as for timing belt replacement. But in the case of the oil pump you have to remove the oil pan too. There is a strainer attached to the oil pump from the bottom you will have remove it too. Then replace the oil pump, make sure that you have replace the oil pan gasket, and oil pump gasket.
