Mine is under the rear seat just unbolt it and remove the cables
It is located behind rear passenger seat. It can be accessed through the trunk.
To remove the rear cup holder on a 1998 Toyota Corolla LE, first remove the seat. Then remove the four bolts holding the cup holder housing.
Move seat back, remove bolts at the front of the chair slide rails. Then move the seat forward and remove the bolts at the rear of the seat slide rails. Disconnect control connections (Lumbar, heater etc)
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
# Slide your fingers underneath the bottom part of the seat from the front. # Pull up. Hard.
If its a convertable, remove the the screws under the rear seat and remove. Then remove the screws holding the leather enclosures and remove from sill plate. remove the speaker boxes and replace. If you don't have new speaker boxes remove cover a speaker box, access speaker and replace, you will probably have to solder the wires, then reverse the order and put back together.
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do you remove the rear seat on a 2002 diamante
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!