answersLogoWhite

0


Best Answer

On an M reg 106 1.5D it is surprisingly easy. The odd shaped Peugeot radio fits in a standard radio slot. To be honest the easiest thing to do it take it to a Peugeot dealer and ask them nicely to remove it - it will take them thirty seconds using the special tool. Alternatively the Haynes manual tells you how to make up a pair of tools to do the job. A long flat key is slid down each side of the radio and hooks behind the retaining lugs. Get them in place properly and the radio "just" slides out. Replacement radio just slots in, though you will need a conversion kit for the electrics, or to do some soldering.

with two screwdrivers and a knife just anchor a screwdriver in either side and then un clip the latches with the knife

For the majority of the standard stereos two 'flat keys' are required if you head to you nearest halfords/motor store they're bound to have some and theres a good chance you can just borrow them to rip out the stereo...I don't know how easy they are on different models but my 2000 Zest 2 was virtually welded in lol so may have to involve a screwdriver to get some leverage.

On my 206 (petrol c 2003) the following worked. Insert a pair of small screwdrivers about 3cm in the two holes on the right (until you feel them contact the spring catches) & a thin flat blade between the radio and the trim. Press the screwdrivers outwards to release the catches and gentle east the right hand end of the radio out a cm or so with the help of the blade. Then repeat at the left end. Repeat once more at each end if you need to & then radio should slide out.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the factory radio on a Peugeot 106?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you reset your standard Peugeot 106 radio Mine is stuck on one band and won't change?

Well remove the radio and there is a master reset on the radio. But if you just remove the positive terminal from the battery it should reset it. And you don't have to remove the radio to do that


Do you have to remove the bumper to change a peugeot 106 headlight?

Yes


How do you remove a cylinder head from a peugeot 106?

with a bar of soap


What is the button sequence to recode the radio and CD player in a 1999 Peugeot 106 Zest 2 1100cc when the handbook shows a radio and tape player not a radio and CD player?

The radio/casette player in a peugeot 106 comes with a 4 digit preset which is input by pressing 1,2,3 and 4....the combination is provided by Peugeot itself, if u have lost the combination then u might have to pay £30 to Peugeot to get it unlocked, it'll be cheaper to buy a new stereo.


How do you remove door handle Peugeot 106 Tried always but cant do it aaghhh?

on my r reg 106 i drilled out the 2 rivits


Dashboard lights on Peugeot 106?

What's the question? Yes, a peugeot 106 has dashboard lights.


How do you change the front lights on a peugeot 106?

you haft to remove the bumper first to get to the bolts holding in the lights


Is Peugeot 106 considered vintage?

No the Peugeot 106 is not considered vintage. This is true because the Peugeot 106 was made in the year 1991. To be a vintage car you have to be around for more the 20 years


Will Peugeot 306 gti engine fit a Peugeot 106?

No


Do peugeot 106 alloy wheels fit a peugeot 205?

Yes, as long as your wheels are 4 stud. Some peugeot 106 models are 3 stud.


Where are Peugeot 106 cars manufactured?

Peugeot 106 cars are no longer manufactured. If you want to buy one, you must buy it second hand. However, the Peugeot 106 was originally manufactured in France. They were also manufactured in Tunisia.


Do Peugeot 106 alloys fit on Peugeot 206 wheels?

yes