To remove an engine cover from a 2008 Volkswagen Jetta all of the mounting bolts need to be located. There are several around the engine bay. The clips for the air intake need to be removed as well. When everything is unbolt the cover can just be pulled off.
The 2008 Volkswagen Jetta has an inline 5 engine.
The 2008 Volkswagen Jetta has a 2.5 L base engine size.
6.3 qts
It is on top of the engine. You have to remove the air filter assembly and the cover between the heads.
There are three screws holding up a plastic cover under the glove compartment. remove those, pull the cover down, remove and replace the white rectangle(the cabin filter) then put it all back together its that simple. :)
It means look and check your engine, it needs care.
Remove the sound baffle to gain access to the filter cover by removing eight(8) screws on each side of the barrier. Remove retaining line from bottom of plastic filter cover. Rotate the cover counterclockwise. Be sure to place a container under the cover to catch the oil that will leak as you rotate the cover. Remove the filter cartridge and the O-ring inside the cartridge cover. Lightly coat the new O-ring with oil before inserting it into the cover. Place the filter cartridge into the cover holder on the engine making sure the cartridge is fully inserted. Carefully replace the plastic cover and snugly hand tighten clockwise. Replace the retaining line to the bottom of the cover. Refill oil and run engine to check for leaks. Replace the sound baffle.
remove oil cap tube then lift it up
6.2 quarts with a filter change
The 2008 Volkswagen Jetta has 20 valves.
The 2008 Volkswagen Jetta has a 5-speed manual.
The 2008 Volkswagen Jetta is a gas-powered vehicle.