Begin by removing the inside door panel. Remove the linkage from the window winder. Remove the window winder retaining bolts. The window winder will come off.
How to remove Window Winder Handles from VZ Holden Commodore
remove the tiny C clip from under the winder 1.25 1996 N. don't rip it off like I did.
Just pull it!
take it to safelite lol
With a knife. A sharp one.
The window winder is secured by a spring wire clip. Push the circular pad away from the winder handle and pull out the clip with a crochette hook or similar.
sounds like you window winder spring attached to your winder might be broken or the cogs on the winder have heaps of wear eg not touching sounds like you window winder spring attached to your winder might be broken or the cogs on the winder have heaps of wear eg not touching sounds like you window winder spring attached to your winder might be broken or the cogs on the winder have heaps of wear eg not touching sounds like you window winder spring attached to your winder might be broken or the cogs on the winder have heaps of wear eg not touching
With the handle end in the down position. Slide the spacer up. You'll hear a click. Then pull away the whole handle. (Note: The spacer is the whole plastic collar between the handle and the door card)
purchase a 'door trim removal tool' from any auto shop and jam it under the retainer under the winder. this will allow the winder to be slid off its nipple.
take it to the garage
Begin by removing the inside door panel. Remove the wiring harness from the electric window regulator. Remove the window regulator retaining screws.