answersLogoWhite

0


Best Answer

The appropriate way to remove Brava ignition barrel is to start by removing the ignition cowling. The housing is held in place by three screws located on the underside of the cowling. Remove the three screws and the plastic cowling. 2. You now have the ignition barrel holder exposed which is a long plastic cylinder running across the underside of the steering column. Looking at the underside of the cylinder you will see a small cut out in the cylinder. If you look in this cut out you will see a metal lug protruding into the cut out from the inside of the cylinder. Using a flat bladed screwdriver try pushing the lug towards the centre of the cylinder. If it moves inwards move to step 3. If it does not move turn the key in the ignition barrel and then retry pushing the metal lug inwards. 3. With the metal lug pushed in lever the ignition barrel out. The barrel should slide out easily. 4. If you are replacing the barrel with a second hand one please bear in mind that your ignition system will still require the transponder located in the key from the original ignition barrel. There are two ways of overcoming this the first is to strap the original key towards the outer edge of the ignition barrel either using electrical tape or a tie wrap. The second method is to obtain a transponder key with replacement barrel and remove the transponder out of this key and replace it with the transponder from your original key. The transponder looks like a black piece of metal which is wedge shaped. It is quite small and be careful not to drop it when taking the keys apart.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove Fiat brava ignition barrel?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove fiat stilo ignition barrel?

to remove stilo ignition barrel, look underneath the barrel. there is a square button holding the barrel in. put the key in the ignition, turn 2 notches, and press the button in with a screwdriver. Then wiggle the barrel out using the key.


How do you do timing on r reg fiat brava 1.6?

Brava 1.6. engine code 182A4.000 Ignition timing is not adjustable. The timing is controlled by the ECM.


Where are all the sensors on a Fiat brava?

Where are all the sensors on a fiat brava 80 sx 1.2


When was the Fiat Brava produced?

The Fiat Brava was a car produced by Fiat, an Italian automobile maker, in 1995. These cars were produced in combination with the Fiat Bravo. They were produced until 2001.


What is the market value for a Fiat Brava?

Depends what u want in the fiat brava and what year and the like the size engine. but I will say the average decent brava is about £200 - £400


Where is the air filter on a fiat brava?

On most cars, air filters are located on the top of an engine. This will probably be the same location for a Fiat Brava.


How do you change the pollen filter on a fiat brava 1999?

You need to remove the plastic panel at the base of the windscreen the filter is located under there.


Where are the spark plugs located in a Fiat brava?

In Fiat Brava 1997, the spark plugs are located under the hood under 4 cables that are located in the middle of the engine.


Why does the passenger door on fiat brava keep getting stuck?

It is possible that the door on the Fiat Brava is stuck because the latch is bent. It may take a professional to change out the parts.


Where is fuel injector on Fiat brava?

The fuel injectors in a Fiat Brava areÊlocated in the fuel rail. The fuel rail is located under the vehicle's hood and looks like a pipe.


Where is diagnostic socket?

fiat brava 1.6 16v 2001


Where is the fuel pump located on fiat brava?

in the fuel tank