Volvo v70 rear seat can't fold flat
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
Remove the two Allen bolts at the rear end of the seat with a hex wrench, then slide it back.
if it has power seats first unlug wire under rear of sear then remove the four bolts two at the rear and two at the front of the seat should be ready to come out of vehicle
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do you remove the rear seat on a 2002 diamante
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
remove the 2 bolts on the floor in front of the seat, and the 3 bolts on the floor at the rear of the seat.
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.