it means you need to check the pressure on your types. when correct the lights will go out.
Get the ecu codes read, there is a fault code listed in the engine ecu
fix airbag fault & serv light will go out
The serv light means that there is a problem with the ecu,u will have to take it to a garage to get looked at
The service light can be on for several different reasons. The most common reason is to alert you to change the motor oil.
turn the ignition off hold the round button on the end of the wiper stalk and turn the ignition on while holding until the dash starts flashing and resets may say mileage until next service or count from 10 to zero
The service engine warning indicator, on the instrument panel, is an indication that the oil needs to be changed. Change the motor oil and the warning light should go off.
The population of SERV - charity - is 0.
SERV - charity - was created in 1981.
Turn on the ignition but do not start the car, press the button on the end of the wiper arm until the "miles to next service" is displayed on the odometer. Then press and hold the trip reset button until the display resets to 18000. This should also turn out the service and stop light. Turn off the ignition then restart the car. If your car has serv (amber ) and stop (red) lights showing it could the immobiliser. My 1996 Laguna lights come on and car won't start. Car needs to be started within a certain time period of doors being unlocked. Using key lock all doors then re-open this should reset system. I have had stop light on until car is started 3 times successfully (resets codes)
What is OPMI Treas 310 XXCiv Serv?
Just bought a Renault Clio 1.2 Grande for my son, after 2 weeks the Airbag light and 'SERV' light stayed on, i sprayed all electrical connections with solvent electrical cleaner, wait for it to evaporate then spray WD40, also under the passenger seat is a connector make sure the wires are pushed together and do as above, hard to believe but it cured the problem I have similar (recurring) problem with 2001 Expression - usually happens after the passenger seat has been pulled forward to let rear passengers in - I just wiggle the connector block under the seat (presumably a loose connection there) and it goes off.