There is only one fuse for all power windows. If only the passenger side window does not work, the problem is either with the passenger window switch or the motor on that window.
if the glass is the only problem you will have to drill out the rivets in the glass or remove the bolts if someone has done it already
there is a disable button on driver door so other windows wont work. Try clicking it in the other direction.
cuz back then they only needed the passenger door lock....you were in the drivers seat....you had to be able to get in and drive really quick after you robbed a bank
Because back then, all you did was parallel park so you would slide out of the passenger side and out the passenger side door since it was to the curb. Then you could lock your door and not be in traffic.
Has the power window lock switch on the drivers door armrest been switched on ?
No they do not, only the driver side window, passenger side window, and sunroof are the only one that opens
Possibly needs a window motor or a window regulator.
pop the clips that are holding the Electric window switch and pull the switch out replace it and place it back in with the clips. if you broke the clips you will have to replace them. they only cost 1.05 at Chevy shop....
I would suspect an intermittent short in the wiring to the power window motor in the section between the door and the door jam.
how do I replace the passenger side window regulator on an E250, 2006. the window will not release to push to top of window frame only half way?
Bad relay/window motor/switch/wiring...........