hello i recently had problems with 98 106 diesel. my imobiliser was keypad type next to the gear lever. the problem i had is that it would not turn its self off and the engine would not work. the way to reset it is to disconnect a connection which is next to the passenger head light. it is a round connection which is quite big. unscrew this, makesure it is clean and reconnect. start the engine. while the engine is running lift out the imobiliser key pad and disconnect the plug. turn off engine and restart no need for imobiliser!!!!! hope this helps
Peugeot 106 workshop manual.
How do you disable immobilizer system alfa156
How to disable Peugeot 206 immobilizer?
i dont know how to disable completely but if you have got the code wrong a few times and wont let you try again then you have to disconnect the battery in order to try again.
Yes, you can disable the immobilizer on a 2001 eclipse.
Have a look in behind the glovebox, should be a plug. Disconnect that to disable the immobilizer.
Depends on wat year model it is! if it is wat i think it is its easy just 4 wires needs to be bridged!
there isn't one, usually a key
pull plug when car is craken up
May require a new ignition barrel. The 106 is known for problems with the ignition barrel. Looking at a bill of �60 - �200 depending on where you go and the type of immobilizer used on the car.
how do you deactivate the immobilise on a vauxhall corsa se 1.4
The short answer is - you don't!! wouldn't be much of an immobilizer if it were easy to bypass. You need to either fix the fault which is causing the problem, OR send the engine ECU off to a specialist who can reprogram it to disable the immobilizer