I clear the check engine light with a Scangauge II. But most ODB-II devices can read and clear the code.
A person can reset the check engine light by using an OBD scanner to clear the codes. This is after the problem is fixed.
After repairing the cause of the code, you can clear it with a scan tool.
That requires an OBDII engine scanner to clear the codes / turn light off. But if you have not FIXED the problem that made it come on then it will just come on again. Have engine scanned.
it means you need to check the engine
You can not disconnect the check engine light.
A flashing check engine light is an indication of a severe engine misfire.
Auto Zone will check your engine light for free... Write down the codes and go from there.
According to the 2000 Ford Explorer Owner Guide : No , a separate fuse for the check engine light is not listed
The check engine light is a " picture " of an engine , just to the left of the engine temperature gauge
a 2000 dodge ram 1500 the check engine light is on and the code says torque converter and clutch and overdrive solenoid. what do you think that the problem is?
With a scan tool.