0
open the boot. in the inside storage compartment ( if driver's side you'll have to remove the shopping trolley first), remove the trim covering the access to the lamps. Press on the silver latch (spring) to release the lamp covering. It takes some strength so you might need something like a scredriver. Then pull the lamp unit from outside, downwards to release the upper retaining spring. you'll then see two tabs on the sides of the black cover, press inwards to open. There you go, you now see three bulbs. The top one is the brake light. :-)
Add your answer:
Earn +20 pts
How do you change the brake light bulbs on a 1994 Chevy Corvette?
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
How do you change the brake light on a 2001 Nissan Quest?
The light assy has to be removed and the bulbs removed from the back.
How do you change the third brake light bulbs on a 1995 Chevy 2500?
Remove the two screws that hold the lens on, remove the lens and change the bulbs.
How do you change the brake lights on a 2002 Jeep Liberty?
The brake light bulbs ar removed from the rear of the light assy . Take it off of the body.
Rear middle light on Lincoln Mark VIII does not work?
If you mean the brake light, you just have to change the bulb or bulbs.
What color are your brake lights?
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
What color are brake lights?
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
What bulbs go in a s-10?
Headlight bulbs, high and low beam, parking light bulbs, signal light bulbs, brake light bulbs, dash light bulbs, interior light bulbs, plate light bulbs, etc.
How to replace the third brake light on 1996 Chrysler sebring convertable?
I assume you only need to change the bulbs. Go into the trunk and look up. You should see the wires leading to the mounting point for the third brake light, you candisconnect the connectors and then change the bulbs this way.
I have a running light but when applying the brake the brake light doesn't come on?
check light bulbs and fuses. light bulbs have 2 elements in them, one for stop and one for running. if thses are ok, replace brake light switch on brake pedal
How do you change the brake light on a 1996 Lincoln Mark 8?
If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk. If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk.
Why brake light in rear window come on but brake lights dont on 89 Nissan Sentra bulbs are fine and brake light switch has been changed?
check your bulbs
