which one? front, rear, side?
Try this video it helped me a lot http://www.youtube.com/user/ClioRepairs?feature=mhee
changing head lamp bulb on Audi q7
changing head lamp bulb on audi q7
To remove the indicator from a 205, you need to remove the lamp first as far I am aware. 1) remove front grill, held in place by two screws on either side of the lamps. 2) now you can see springs on each side of the headlight. pull them back and remove lamp. 3) this should give u access to indicator housing. remove screws. the indicator is out!
Very easy, open the bonnet. On the indicator you will see a tab. Simply gentle lift the tab and slide the whole indicator forward. The lamp holder will come out with a twist.
It's an yellow warning indicator lamp. It lights when brake pads are weared. Now it's time to replace the used brake pads!
Begin by removing the side indicator lamp connector. Take hold of the lamp, push in and turn at the same time. The lamp will come out.
The easiest way to reset the timing belt indicator lamp in your Toyota automobile is to remove the fuse for the indicator lamp. Keep the fuse out for approximately 30 seconds. Put the fuse back in and the indicator light should be off.
If it's just the bulb you are replacing it is done by removing the indicator (unhook the spring in the engine compartment and slide the indicator forward). If you need to replace the whole lamp then the bumper has to be unbolted!
reach up under front bumper and twist the bulb out.
in the engine bay behind the blinker you will find the globe holder it has 2 wires going into it, turn and remove (sometimes hard) then you will see a plastic nut (quite big) remove it and the indicator will pull out hope this can help.