their are 4 plastic nuts in the trunk that loosen the light assembly that the lights are in. Remove those and pull the assembly out and twist the connector for the license plate light to access the bulb.
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
Yes, all cars have a license plate light. It is mandated by law.
how to change 2005 equinox license plate light i removed the screws but it didn't release
A Chevy Tahoe's license plate bulb can be used to light up the license plate. In the dark the license's plate will still be visible.
in back above liscense plate,there should be 2 screws undo these screws, and pull out assembly to change bulb.
take off the license plate then screw the holder on with the plate.
short and sweet, zip-ties!
the plug on the back side of the bumper twists to the left and you pull it out of the bumper
How do you change the lamp on the license plate of a lincoln ls 2000?
how to change the license plate bulb onLook at the rear plate , then get on the ground so you can look up to the underside of the bumper, where the plate is. There are two Phillips screws the hold your plate light, remove both, pull down gently on the light, then turn it co you can see the rear and with both Hans turn the socket and pull, there you will find the bulb. change it and do the reverse to install.
bend over sheave it up ur asss
yes there is, just above rear plate.