1)buy the right flasher for your car 2)get underneath th dash facing up(head on the pedals) 3)remove the plastic cover and you will se the fuse panel, on top of ityou will se a couple of relays and flashers 4) you just have to find the one with the same numbers and letters that the one in your hand,remove an d replace and bingothere is a list in the cover itself. 5)check that is working , and its ready!! have a nice day DamainmMan
How to change blinker switch in a 1994 Firebird ?
On my '93 940T, the flasher projects from the left side of the steering column (between the blinker lever and the steering wheel). You push it in to turn the hazards on, at which point the flasher button blinks red too.
The turn signal Flasher Relay is located in the front seating area, driver side, under dash, mounted driver side of steering column.
Defective Flasher Relay. Replace it.
Unless it was added. The 1994 Jetta was not equiped with a cabin filter.
Not sure if your looking for the flasher fuse or the flasher itself. Both flashers (blinker and flasher) are located under the steering column, you need to take our about 6 screws in all and two panels come off. This isn't the fuse box under there, but right above it. A good tip for finding flashers; Both flasher boxes are usually in the same location, so follow the clicking of the flasher box that does work. If you cant hear a click, its probably under the hood.
What mean the code troble 1476.8 VW jetta 1994 engine 2.0
FLASHER MODULE??????????????????????
Replace flasher(S) under dashboard located near brake and gas pedal areas of car They are round /cylindrical style and pull like a regular home extension cord.Turn signal lights on and listen for click noise .replace bad one or both.Very inexpensive
The hazard flasher unit is located under the LH side of the instrument panel between the junction block and the brake pedal.
Begin by removing the belt from your 1994 VW Jetta alternator. Remove the alternator wiring harness. Remove the alternator retaining bolts.
Answer:A 1994 Jetta with 2.0 4 cyl engine takes 3.7 quarts of oil without changing the oil filter. With the filter change it is 4.2 Quarts. The 2.8 V6 engine takes 5.3 quarts of oil without the filter change. With the filter change it takes 5.8 Quarts. I recomment changing the engine oil filter with every oil change.