Nissan primera overheating after changing the water pump and radiator what could be the cause of this
The best way to reset the engine warning light on a Nissan Primera p12 would be to take it to a mechanic. It is best to have a mechanic check it out to make sure nothing is wrong that could malfunction and put someone in danger. The mechanic will be able to reset the engine warning light.
There is no sequence, But it is common practice to start with the caliper closest to the master cylinder and work out.
timing chain
Seat belt alarm not annoying,but beeps when left indicator in use as well. Took dashboard off (easy job,just four screws) and behind dials is beeper. Just unplug it. Just keep in mind,when lights are on and you open door,beeper will not inform you about this. Hope this helps rob
ive got 2004 p12, im guesing they're the same. Anyways, in the dirvers side, under the wheel to the right, there should be a panel which you can remove to get to fuses. The cig lighter on mine is a little 15 amp fuse (blue in my case) but there should be some schematic on the panel cover itself so you can double check its the right one
If you are referring to computers, it is a 6pin power connector for modern Video cards. Most new video cards require at least 1 P12 connector, some require 2 P12 connectors.
Yes, the Turtle Beach P12 headsets do work with the PS3 console.
The saloon version is to open the hatchback. On the inner sides of the the lights is a plastic cover strip which is clipped in place( hidden). Remove this cover strip carefully as the plastic is hard and breaks. You will then find under the light unit the bolts to remove the whole light unit. The unit plugs into the the car wiring and can be unplugged, the screws on the back of the light unit can then be removed to access the bulbs. Best of luck
P12 per pill :)
Luke could hear the outdoors calling to him (p12)
Depends on who made it.
hahaah thiss is a teacher at p12 secondary college hahahahah :):) good timesss