0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Is the hard drive connected to a mounting bracket If so what type of screws secure the hard drive to the mounting bracket?
Is the hard drive connected to a mounting bracket? If so, what type of screws secure the hard drive to the mounting bracket
Where can you buy a galvanized nail?
At home depot or maybe at your closest dollar store, they have a lot of different types of nails, but be careful what they say because they might be screws instead.
What are all the different screws in the world?
I dont know all of them. There are probably alot. Screw screws.
What are the different types of arithmetic operators?
+,-,*,/,% are the different types of operators.
What are the two types of screwdrivers?
There are more than two types, but the main categories are flat head and cross/star screwdrivers. Actually, there are four: flathead or standard, phillips head, hex or Allen head, or Torx or star head. Torx/star head and Allen/hex head fasters are more often than not bolts, differentiated from screws, but there are a number of different styles of actual screws that are manufactured for these two bits as well.
Is the hard drive connected to a mounting bracket If so what type of screws secure the hard drive to the mounting bracket?
Is the hard drive connected to a mounting bracket? If so, what type of screws secure the hard drive to the mounting bracket
What type of screws secure the hard drive to the mounting bracket?
The technical term for the screws are called "Hard-Drive Mounting Screws" and you can buy them most anywhere.
How do I install my GPS with mounting brackets?
Your GPS comes with a bracket, and screws. There should be instructions that tell you how to install the screws into the bracket to provide a stable mounting surface for your GPS.
How do you remove vacuum advance pot on 454 distributor?
Detach the vacuum hose from the vacuum advance unit. Remove the distributor cap and unscrew the two mounting screws. Pull the rotor off the shaft and remove those two mounting screws as well. Unscrew the two advance unit mounting screws and remove the unit from the distributor.
Can you put a tippmann x7 cyclone hopper on a tippmann 98?
No, the mounting screws are different, it will not fit the 98. There is a 98/USarmy cyclone feed made that will fit.
How do you remove the front bumper on a 1991 Acura Integra?
The front bumper on a 1991 Acura Integra is held on by several mounting screws. Remove all the screws and gently pull the bumper off the remaining mounting clips.
How do you remove the radio from a 2005 Acura TL?
To remove the radio remove the mounting screws for the center console. Pull the center console off the 2005 Acura TL. Remove the rest of the mounting screws and pull the radio.
Need to find what the caliper screws into?
On some vehicles there is a caliper mounting bracket, on others the caliper screws directly to the steering knuckle.
How do you mount outside rear view mirror on a 1966 mustang?
there should be a mounting bracket that screws onto the door and then the mirror screws to the bracket.
How do you remove the dashboard of a 1985 Honda Civic?
The dashboard of a 1985 Honda Civic is held together by a series of mounting screws. To remove the dashboard loosen all of the mounting screws. Pull the remaining clips off and take off the dash.
What is the two types of mounting?
Two types of mounting are surface mounting, which involves placing components directly onto a printed circuit board, and through-hole mounting, which involves components being inserted through holes on the board and soldered in place.
How do you remove the door panel from a 2002 Honda civic?
The door panel on a 2002 Honda Civic is held on by several mounting screws and clips. Remove the mounting screws first, then pull the panel off. The remaining clips will just pop off.
