answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why transistors is not used instead of diodes in building logic circuits?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

Diodes and transistors are made of semiconductor material such as germanium and what?

Silicon


What are the advantages of collector to base biased?

it converts it to a diode. sometimes this is done for matching the characteristics of diodes and transistors in the circuit. standard diodes might not have similar enough curves to the transistors for the circuit to operate correctly.


Can back to back semiconductor diodes can be added as npn or pnp transistors?

no, the shared base of a transistor between the emitter & collector must be thin to get the transistor effect. the thinner the better for high frequency transistors. this cannot be faked using individual discrete diodes.


How many transistors did the ENIAC have?

Eniac didn't have any transistors. It was built with 17,468 vacuum tubes, 7,200 crystal diodes, and a whole host of other components. But no transistors. The first transistor was created in November, 1947, almost two years after Eniac was completed.


Is there another use for semiconductors other than to conduct electricity?

Yes. In electronic devices, semiconductors fulfill a variety of functions, including current filtering - a semiconductor diode only lets current pass in one direction - and signal amplification, using transistors. Transistors have many uses, including for electronic switching. Do some reading on diodes and transistors, while bearing in mind that they use semiconductors.Yes. In electronic devices, semiconductors fulfill a variety of functions, including current filtering - a semiconductor diode only lets current pass in one direction - and signal amplification, using transistors. Transistors have many uses, including for electronic switching. Do some reading on diodes and transistors, while bearing in mind that they use semiconductors.Yes. In electronic devices, semiconductors fulfill a variety of functions, including current filtering - a semiconductor diode only lets current pass in one direction - and signal amplification, using transistors. Transistors have many uses, including for electronic switching. Do some reading on diodes and transistors, while bearing in mind that they use semiconductors.Yes. In electronic devices, semiconductors fulfill a variety of functions, including current filtering - a semiconductor diode only lets current pass in one direction - and signal amplification, using transistors. Transistors have many uses, including for electronic switching. Do some reading on diodes and transistors, while bearing in mind that they use semiconductors.

Related questions

What are some simple electronic devices that are used in electrical engineering?

Resistors, capacitors, inductors, transformers, diodes, transistors, integrated circuits, power sources are the basic building blocks.


What displaced the vacuum tube in most electrical circuits?

Solid state electronics (diodes and transistors primarily)


How many transistors can fit in a microchip the size of a penny?

That depends:simple passive circuits have no transistorsvacuum tube circuits have no transistorssolid state circuits can have anywhere from no transistors (just diodes and/or magnetic amplifying transformers) to as many transistors as needed to perform the function


What are the wires transistors and circuits in a computer called?

The common name is electronics or microelectronics. These resistors, diodes, capacitors, and integrated circuits (chips) are typically mounted on cards or a "motherboard."


How do you spell electicute?

The likely word is electronic (any form of circuits, printed circuits, transistors, or diodes).


Why semiconductor is useful?

Semiconductors are useful in electronics because they can selectively conduct electrical current, making them ideal for building devices like transistors, diodes, and integrated circuits. These components are the building blocks of modern electronics and are essential for applications ranging from computers and smartphones to medical devices and renewable energy systems.


What is the use of integarted circuits ic is there any relation between ic with processor and what is relationship?

An integrated circuit contains multiple diodes and transistors on silicon. A processor performs the calculations in a computer.


Diodes and transistors are made of semiconductor material such as germanium and what?

Silicon


Silicon is used in computer circuits what special of silicon means that it can be used for this?

It is a semiconductor and therefore can be used to make diodes and transistors for digital circuits which are robust mechanically and electrically. Silicon is inexpensive and widely available, and there is now a well developed industry in handling and manipulating it.


What are the advantages of collector to base biased?

it converts it to a diode. sometimes this is done for matching the characteristics of diodes and transistors in the circuit. standard diodes might not have similar enough curves to the transistors for the circuit to operate correctly.


What properties of the materials used in computer chips make them useful as switches that turn on and off?

The silicon is a semiconductor and can be doped to control its conductivity and create the junctions needed to make diodes and transistors. These diodes and transistors can act as switches and logic gates in properly designed circuits. Silicon can also be easily oxidized to become a robust waterproof insulator to passivate and protect the circuits and components beneath it. The aluminium and/or copper are just good conductors used to "wire" the silicon components together and provide pads that can be used to attach wires or metal beads so that the chip can be connected to external circuits.


What property of the materials used in computer chip makes them useful as switches that turn electricity on and off?

The silicon is a semiconductor and can be doped to control its conductivity and create the junctions needed to make diodes and transistors. These diodes and transistors can act as switches and logic gates in properly designed circuits. Silicon can also be easily oxidized to become a robust waterproof insulator to passivate and protect the circuits and components beneath it. The aluminium and/or copper are just good conductors used to "wire" the silicon components together and provide pads that can be used to attach wires or metal beads so that the chip can be connected to external circuits.