0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Will a 3 phase generator at 6kva run a 3 phase mincer 50 hz 415?
No it will not run
Why a given generator frequency is dictated by the size of the magnetic flux?
A generator's frequency is dictated by the power system frequency, and the number of poles in the generator. For 60 Hz power and a generator designed with two poles, the generator must turn at 3600RMPs (60 Hz * 60 seconds / minute). The magnetic flux is what induces the current in on the output winding. Spinning a synchronous generator faster or slower is not done to control the magnetic flux. The field winding voltage is varied to control this, and in turn control the output of the generator.
How do you convert 120 v 60 Hz generator to 100 v 50 Hz as in how to use an American made generator in Eastern Japan?
Try running the generator at lower rpm by adjusting engine speed. If 120v 60hz generator is designed for 1200 rpm, then try running it at 1000 rpm.
Can you pass 60Hz current to 50Hz transformer?
Yes that's fine provided the voltage is the same in both cases.But if a 60 Hz transformer is run on 50 Hz it might run slightly warmer than usual so it might need to be derated by 20% or so.CommentIt might be worth while pointing out that it's the voltage that needs to be derated by around 20% when a 60-Hz transformer is operated at 50 Hz.
Is it okay to connect 50 hz to 60 hz?
Assuming that you are referring to a piece of equipment designed for 60-hz power being connected to a 50-hz power line (common overseas), It depends on the application. If the load is a DC power supply, they are often rated for both 50 and 60 hz. If the load is a motor made for 60 hz, for example, it will run about 17% slower at 50 hz than at 60 hz due to the design of induction motors, and at higher current because of lower inductive reactance. If the load is fluorescent lighting, it may display an annoying flicker, and the ballasts will probably die an early death. If the load is transformer-powered, you'll have the same current problems as you get with the motor. OTOH, if you want to connect a 50-hz load to a 60-hz supply, it has its own issues. E.g., the motor will run faster and cannot be loaded as heavily. Best bet: research to see if the piece of equipment is rated for both frequencies.
What will be the capacity rating of 50 kw generator 380 volts at 60 Hz when reduced to 50 hz?
Frequency is the speed that the generator revolves, not the sizing of the generator.
What is dsadvantages of having 50 Hz supply over 60 Hz supply?
There is no inherent disadvantage of 50 Hz compared with 60 Hz, bearing in mind that systems that run at 50 Hz are designed to run at 50 Hz.
Will a 3 phase generator at 6kva run a 3 phase mincer 50 hz 415?
No it will not run
Can you run 480 volt motors in a 380 volt system?
Can I run 480 volt , 60 HZ motor at a 380 volt , 60 Hz system?
Will an LCD tv 240 v 50 hz run on 240v 60 hz?
Yes !
What will happen 50 HZ motor when you will give 60 HZ?
motor will run at a faster rate.....
Why a given generator frequency is dictated by the size of the magnetic flux?
A generator's frequency is dictated by the power system frequency, and the number of poles in the generator. For 60 Hz power and a generator designed with two poles, the generator must turn at 3600RMPs (60 Hz * 60 seconds / minute). The magnetic flux is what induces the current in on the output winding. Spinning a synchronous generator faster or slower is not done to control the magnetic flux. The field winding voltage is varied to control this, and in turn control the output of the generator.
Can you use your 50 hz electric drill on 60 hz area?
Yes, but the drill will run slower.
How do you convert 120 v 60 Hz generator to 100 v 50 Hz as in how to use an American made generator in Eastern Japan?
Try running the generator at lower rpm by adjusting engine speed. If 120v 60hz generator is designed for 1200 rpm, then try running it at 1000 rpm.
How does an electric clock made to operate on 60 HZ 120 V system behave if pluged into a 50 HZ 120 V system?
As clock motors are synchronous in design for a particular frequency, the 60 Hz clock will run slower on 50 Hz.
How do you run a 460 volt 60Hz motor with 460 volt 50Hz power?
If 50 hz is applied instead of 60 Hz, the speed of the motor will reduce by 10 hz equivalent. If you still want to keep the output speed equivalent to 60 Hz, you will have to use suitable gear box or so, to increase the speed to 60 hz equivalent.
what cycle do electric appliances run on in the US?
The standard electrical supply in the US is 120 V, 60 Hz. Some major appliances use 240 V, 60 Hz.
