A burner is the part of the boiler that creates and controls the flame that heats the water. If you meant difference between a boiler and a furnace, a boiler makes hot water and a furnace makes hot air.
No. The pilot valve is closed when no flame is sensed by the thermocouple.
The boiler holds a quantity of water - which is heated by gas flame or electric element. The hot water is pumped around the heating system in an endless loop, gradually cooling as it travels. The cooler water returns to the boiler to be re-heated.
Because you are using the Hot water faster than the boiler can produce it. Turn the tap/faucet off a bit. Get the proper sized boiler
its a device use for measuring the salinity of boiler water. it is generally fitted in water drums .its is provided to prevent the flashing off of boiler water under high pressure condition.
How do I start my gas boiler when the flame turned off??
A flame eye in a boiler works by detecting the presence or absence of a flame in the combustion chamber. It uses a sensor that measures the UV light emitted by the flame. If the flame is extinguished, the flame eye will signal the control system to shut off the fuel supply to prevent unsafe conditions.
Lithium turns red in flame tests.
The flame on a gas boiler should typically be a steady blue color. If the flame is yellow or any other color, it may indicate that there is a problem with the gas mixture or combustion process, and you should contact a professional to inspect and address the issue.
The salt in the air from the sea, turns a camp fire flame blue as it is lit, it then retearns to normal.
Probably the flame sensor.
A burner is the part of the boiler that creates and controls the flame that heats the water. If you meant difference between a boiler and a furnace, a boiler makes hot water and a furnace makes hot air.
Oxygen (O2)
No. The pilot valve is closed when no flame is sensed by the thermocouple.
The colour turns brick Red .
The boiler holds a quantity of water - which is heated by gas flame or electric element. The hot water is pumped around the heating system in an endless loop, gradually cooling as it travels. The cooler water returns to the boiler to be re-heated.
Sulphuric acid turns to a bright orange.