0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the difference between loop start and ground start?
The typical analog circuit that connects between the customer premises and the central office (phone company) has two copper wires. These wires are referred to as TIP and RING. There is typically a -48 VDC signal between the TIP and RING wires which is typically powered by the central office switch. When a standard analog phone is connected to the analog circuit and the handset is picked up (going off hook) a switch on the phone closes the connection between the TIP and RING wires and current is drawn from the central office switch. The switch determines that current is being drawn and provides dial tone so the person on the phone knows it is time to dial a number. A PBX FXO circuit running loop start looks like a standard analog phone to the central office switch. Now, one problem that is often seen with loop start circuits is a condition called "glare". Glare occurs when a call comes in on the analog line from the central office at the same time the PBX wants to seize the same line to make an outgoing call. The ground start protocol was designed to eliminate this problem with glare. From the PBX side, the RING lead is grounded first, then the central office circuit must ground the TIP lead before the PBX can close the loop between TIP and RING.
What is leading pole tip?
The pole tip which is met first during rotation by armature conductors is known as leading pole tip
How do you write a pseudocode program that commutes and displays a 15 percent tip when you input the price of the meal?
input price calc tip = price*0.15 print tip
What is the function of a wing tip?
madherchood
What is a coolant in a CNC machine?
A coolant is used to keep the tool tip cool. Keeping the tool tip cool prolongs the life of the tip ensuring the accuracy and consistence of the machined component. Coolants are mixed with water and are anti-corrosive. If correctly mixed, it will not cause corrosion to any of the machine's parts.
How do you tie a knot at the end of a balloon?
Well its kind of like tying your shoes. take your index finger, put it on the side of the balloon tip, twist the balloon tip around your finger. then loop the tip of the balloon under the peice of the balloon around your finger. and pull. hope this helps =)
How can you tell if your goalie gloves are too big?
they should fit like a snow glove. If they are too big you will be able to bend the tip back over your finger.
A dactylion is the tip of what finger?
The middle finger
When was Tip - Finger Eleven song - created?
Tip - Finger Eleven song - was created in 1997.
Is the tip of your thumb 1 inch?
yes, in ancient times people used the tip of their finger to measure out an inch. they also used the length from the tip their finger to the other tip of their finger to measure the persons height.
How do you cure a finger tip amputation at home to cure a finger tip amputation?
with the help of lemon(Citrus)
What happens to the tip of the finger in mallet finger?
Without the support provided by the tendon, the short bone at the tip of the finger drops downward at an awkward angle.
What are the six triangular bandages in the first aid box for?
(finger tip bandage- its used just for that the finger tip, it's meant to wrap around the finger
Is it true that if you spread your arms out as far as you can from finger tip to finger tip that's how tall you are?
No, but in most cases its not far off.
What is the definition of dangkal?
span from the tip of the tumb to the tip of the middle finger
What is Distance between tip of thumb and tip of little finger?
palm
What to do when you cut the tip of you finger off?
Go to the emergency room immediately. If you can find the tip of your finger, bring it with. They may be able to reattach it.
