Dirty condenser coil, high ambient temperature, problem with condenser fan, overcharge, non condensibles, high indoor load are the first places I would look. In that order.
Increase, decrease, or remove the load <<>> Change the voltage and the current will also change in direct proportion, Ohms law.
when load on the electric system increase frequency of the system will decrease resulting in higher intake at powergenerators. If higher intake is not net by powergeneration stations entire power system will collapse. It is called grid failure.Another AnswerAn increase in load will result in an increase in load current.
answer is actually voltage
The slip is proportional to the load torque in an induction motor. This can also be seen as a reduction in speed causing extra current to be induced in the rotor to supply the increased torque.
If you increase the load force, the effort force required to move the load will also increase. This is due to the principle of equilibrium in which the effort force must overcome the load force to maintain balance.
Dirty condenser coil, high ambient temperature, problem with condenser fan, overcharge, non condensibles, high indoor load are the first places I would look. In that order.
An increase in load (equivalent to a decrease in resistance*) causes an increase in load current. This increases the internal voltage drop within the transformer, and the terminal voltage reduces accordingly.[*An increase in load means more current is being drawn by that load, so an increase in load is equivalent to a decrease in load resistance]
Yes. A shorted condenser will load the electrical supply and prevent the starter from creating the mechanical force necessary to turn over a motor.
Cooling Load is the amount of energy that is to be extracted from a house to develop a conditioned environment. There are two types of cooling loads i.e, sensible cooling load and latent cooling load.... Heating Load is the amount of heat that is to be supplied to a house in order to increase its temperature to maintain desired temperature...
Increase, decrease, or remove the load <<>> Change the voltage and the current will also change in direct proportion, Ohms law.
Decreases.
size and price will increase, load will increase.....
when load on the electric system increase frequency of the system will decrease resulting in higher intake at powergenerators. If higher intake is not net by powergeneration stations entire power system will collapse. It is called grid failure.Another AnswerAn increase in load will result in an increase in load current.
answer is actually voltage
The slip is proportional to the load torque in an induction motor. This can also be seen as a reduction in speed causing extra current to be induced in the rotor to supply the increased torque.
Increasing the force applied to push the wheelbarrow or reducing the mass of the load in the wheelbarrow will increase its acceleration. Additionally, reducing friction between the wheelbarrow and the ground can also increase its acceleration.