8 Devices can be used on a single SCSI bus.
Boards and connectors are constantly evolving, but the first kinds used for RAM were considered proprietary.This meant that the different computer manufacturers developing memory boards would only design ones that worked with their specific systems.
they used a sponge and a tool that could brake rock. also they used spit to narrow it out
Yes, but you have to use connectors designed for that purpose. Using ordinary wire nuts could cause a circuit failure due to a high resistive junction.
Both common 'TV Coax' and 'Type F' cable connectors are commonly used to support both digital and analog video signals. Plain TV coax connectors (male and female) can easily be taken apart by anyone without having to use any tools, so they are commonly used for making simple cable connections for tv antennas and digital tv set-top boxes. Type F (male and female) connectors use screw threads so that, by using simple tools such as wrenches and/or hand pliers, they can be tightened-up too hard to be loosened and disconnected by hand. That is why Type F connectors are regularly used for making signal connections for cable and satellite tv systems and for computer broadband cable systems.
8 or 16 depending upon the SCSI hardware being used. In a narrow bus, you can use a SCSI ID of 0-7, and in a wide bus, you can use 0-15.
A SCSI connector is used to connect computer parts that use a system called SCSI to communicate with each other. Generally, two connectors, designated male and female, plug together to form a connection which allows two components, such as a computer and a disk drive, to communicate with each other. SCSI connectors can be electrical connectors or optical connectors. A "Mac Stack" of external SCSI devices displaying various SCSI connectorsThere have been a large variety of SCSI connectors in use at one time or another in the computer industry. Probably no computer interconnect (with the possible exception of RS-232 serial) has caused as much confusion. Twenty-five years of evolution and three major revisions of the standards resulted in requirements for Parallel SCSI connectors that could handle an 8, 16 or 32 bit wide bus running at 5, 10 or 20 Mbit/s, with conventional or differential signaling. Serial SCSI added another three transport types, each with one or more connector types. Manufacturers have frequently chosen connectors based on factors of size, cost, or convenience at the expense of compatibility.SCSI often makes use of cables to connect devices together; in a typical example, a socket on a computer motherboard would have one end of a cable plugged into it, while the other end of the cable plugged into a disk drive or other device. This would mean that four connectors were involved in wiring the disk drive and computer together: the connector on the motherboard, the connectors at each end of the cable, and the connector on the disk drive. It is sometimes possible to have cables which have different types of connectors on them, and some cables can have as many as 16 connectors (allowing 16 devices to be wired together). Some types of connectors are typically used inside a computer or disk drive case, while others are used to connect a computer to a separate device such as a scanner or external disk drive.
8 Devices can be used on a single SCSI bus.
SCSI, Fast SCSI, Ultra SCSI, Ultra2 SCSI: 8 devices Wide SCSI, Fast Wide SCSI, Ultra Wide SCSI, Wide Ultra2 SCSI, Ultra3 SCSI, Ultra160 and 160+ and Ultra320 : 16 devices Of course, the number of devices supported depends not only on protocol limitations, but cable length, number of cables used, etc.
SCSI, pronounced as scuzzy, stands for Small Computer System Interface. An SCSI port is used to attach peripheral devices that use the SCSI system , mainly for data transfer.
Narrow boats.
Gold or Tin
scsi stands for small computer system interface and is used for disk drives and other computer devices
Gold or Tin
A SCSI host adapter is a device used to connect one or more other SCSI devices to a computer bus. It is commonly called a SCSIcontroller, which is not strictly correct as any component understanding the SCSI protocol can be called a controller. It connects to the PCI Express.
NTBOOTDD.sys
scsi